TV shows up as On even if it's off

[matej-cupka]

Hi, I had a Samsung UE55AU7172 and it worked great with this homebridge plugin, but I have upgraded to UE65AU7172 which is the same TV but 65 instead of 55 inches. I have chaged the IP, MAC address and UUID in the plugin configuration (even enabled child bridge just to try everything) but very often after turning the TV off it pops in the home app as turned on (making the LED backlight turn on). After a few seconds it shows as off again (turning off the backlight).

Is there a known fix for this issue?

[geertberkers]

I also have this problems with a lot of light, which are turned off by the button on the wall, but tuya/homebridge combination seeys them as on, because when you power on, they are on. Tuya itself shows offline

[MAscooby]

Same issue here, and I think it's because the TV is briefly waking up. I've noticed is that the PowerState is reported as "" rather than "On" during this period, so I assume ping and HTTP are responding but the PowerState value isn't being checked?

{"device":{"FrameTVSupport":"false","GamePadSupport":"true","ImeSyncedSupport":"true","Language":"en_US","OS":"Tizen","PowerState":"","TokenAuthSupport":"true","VoiceSupport":"true","WallScreenRatio":"-1","WallService":"false","countryCode":"US","description":"Samsung DTV RCR","developerIP":"0.0.0.0","developerMode":"0","duid":"uuid:xxx","firmwareVersion":"Unknown","id":"uuid:xxx","ip":"192.168.xx.xx","model":"21_NIKEM2_QTV","modelName":"QN55QN90AAFXZA","name":"SamsungTV","networkType":"wired","resolution":"3840x2160","smartHubAgreement":"true","type":"Samsung SmartTV","udn":"uuid:xxx","wifiMac":"xxx"},"id":"xxx","isSupport":"{"DMP_DRM_PLAYREADY":"false","DMP_DRM_WIDEVINE":"false","DMP_available":"true","EDEN_available":"true","FrameTVSupport":"false","ImeSyncedSupport":"true","TokenAuthSupport":"true","remote_available":"true","remote_fourDirections":"true","remote_touchPad":"true","remote_voiceControl":"true"}\n","name":"SamsungTV","remote":"1.0","type":"Samsung SmartTV","uri":"http://192.168.xx.xx:8001/api/v2/","version":"2.0.25"}

[raulidg33]

I also have this problem. When I turn off the TV PowerState is on "standby" and the tv appears as turned off in homebridge, but after a while the returned value for PowerState is an empty String "", and then the tv appears as ON.

[Mezuss]

I have the same issue with the powerstate “” empty on 2 TVs