esphome-smg-ii

esphome-smg-ii copied to clipboard

1. The SMX uses different register addresses. It's compatible to the SRNE probably. 2. The SMX must be interfaced using RS485. There is no RS232 interface.

syssi

SRNE ASF Support

7

Hi, this may be off topic, but out of all your inverter integrations, this one is the most similar for the srne inverter, and some settings works better compared to...

Fidcom

syssi

syssi

See #28

syssi

Inverter SMG II Easun problem esphome 9.2

1

Hi! I updated the esphome version and since then i am not getting any data. What can i do? ``` Processing smg-ii (board: lolin32; framework: espidf; platform: platformio/[email protected]) -------------------------------------------------------------------------------- HARDWARE:...

spikeshun

Easun SMW 11KW

34

hi, i'm using a k868 a6 board that have the rs232 port, i have connected to the inverter with his original cable. the firmware that i'm using is esphome with...

Alexandros89

Boot loop because of an out of memory exception

1

Hello! When i use esp8266 always get a problem with loop upgrade HARDWARE: ESP8266 80MHz, 80KB RAM, 4MB Flash Dependency Graph |-- ESPAsyncTCP-esphome @ 2.0.0 |-- ESP8266WiFi @ 1.0 |--...

chernienkoii

Inverter SMG II Easun problem connection

13

### Discussed in https://github.com/syssi/esphome-smg-ii/discussions/67 Originally posted by **lxdr23** September 4, 2024 Hi, this inverter I am trying to configure the esphome-smg-ii package via esphome from homeassistant, I directly inserted the...

lxdr23