esphome-seplos-bms
esphome-seplos-bms copied to clipboard
syssi
ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
Hello and welcome. I have a BMS as in the topic and it works with seplos ver2.0, but not everything is decoded correctly. Send data: ~25014642E00201FD30 answer: ~25014F4280800001 0E 0DD2...
TODOs: - [ ] Assemble request frame - [ ] Request status data - [ ] Assemble and validate response frames - [ ] Decode status data - [ ]...
In adition to post: [https://github.com/syssi/esphome-seplos-bms/issues/86](url) and [https://github.com/syssi/esphome-seplos-bms/issues/67](url) I also use the Seplos BMS 48200-1101-10E-SP118-16S (or 1101-4800-10E-BOM-V16-57FTDJR) in a Daly Green mason attached to 3 Victron multiplus II. I managed to...
hello, I cant find in this code the "cell balance voltage" and the batterie power. There is something wrong with temperature, please see picture attach  for...
I have been doing some research on the seplos rs485 bus, and I have programmed a python script to "listen" the data from the complete battery pack (when there is...
This BMS seems to use a very similar protocol to the Seplos, as this project is able to decode some of the data already when I connect it in parallel...
Hi, I have an 10E version of the BMS SEPLOS V2 but i can't receive any data from RS485 bus. I bought this boad : [](https://www.amazon.fr/dp/B0754N794H?psc=1&ref=ppx_yo2ov_dt_b_product_details )and [](https://www.amazon.fr/dp/B0915RF8S2?psc=1&ref=ppx_yo2ov_dt_b_product_details ) I...
