Cannot update to 10.14.4

[chenyisen]

Syscl: Cannot update to 10.14.4 directory by OTA and even failed with all-new install. Within old version of clover, the process stocked in com.apple.displaypoilcyd exited with anormal code:1. And I also updated clover to version 4910 and cannot load into install progess with automatic reboot. Hope for your solution if you have space time.

[chenyisen]

The last message shows"datazone_init:467: allocation zone on dev 0 for allocations of 2 block starting at paddr11501560" and my device reboot automatically.

[chathil]

same issue here.

[x4080]

Do you guys have success go into the mojave boot disk ? I cannot make it boot (take very long time 1 time and no keyboard and touchpad working)

[chathil]

yes, it took me like 15minutes, make sure voodoops2controller kext is in the boot drive. if keyboard and touchpad still not working try to use external device.

[x4080]

In high sierra, when it takes a long time it means there's something wrong with the files, anyone that success booting with installer takes a long time too?

@chathil , did you already success installing mojave yet?

[ramshell2019]

My success was upgraded to 10.14.4，but this efi is not used. https://drive.google.com/open?id=1wgPsACdvyPDYPypqn8v7s28A6ZGqimQf This efi is using FakeSMC.kext. Use this efi to upgrade to 10.14.4, replace the original efi after the upgrade is complete, remember to upgrade the clover version. Use the author efi to start slow problems can try to delete VerbStub.kext

[x4080]

@ramshell2019 Thanks, I'll try later and let you know

[chathil]

it worked, thank you @ramshell2019

[x4080]

@chathil do you create boot disk using @ramshell2019 EFI or upgrade from sierra/high sierra?

[chathil]

@x4080 i use @ramshell2019 EFI to update to 10.14.4 not upgrade from sierra to mojave.

[x4080]

Thanks @chathil