tgFX
tgFX copied to clipboard
synthetos
A GUI controller for the TinyG motion controller.
When I double click on "tgFX.exe" to install tgFX on my Win7 32-bit, it shows: "The version of this file is not compatible with the version of Windows you're running....
I'm unable to make tgFX connect to G2. I have two Shapeoko 2 routers. One running a TinyG V8 board that works fine with tgfx. I also have a Gsheild...
Hey guys, I am not a java expert but I followed the steps described in the wiki and when I try to run the project I get this error message:...
Amazing project btw... Having paused, the machine becomes unresponsive when attempting to click resume. Build 438.02 Tom
I have been trying dfferent graphics programs and associated file extensions to load to tgfx. Any help would be very helpful.
Versions tested: Windows 3259,3260,3505,3625 Linux (WinHack) 3259,3260 Issue: Not able to jog (arrow and +/- keys) No preview window (square have same size as crosshair cursor) All fields in axis...
tgFX should support setting both travel minimum and maximum axis values. Related to this forum post. https://www.synthetos.com/topics/does-not-go-deeper-than-3mm-skips-holding-tabs-all-together/#post-6213
(Generated by PartKam Version 0.05) G21 G90 G40 (profile 1) G0 Z2 T0 M6 G17 M3 G0 X0 Y-124 G1 Z-0.5 F300 G1 X240 Y-124 F800 G1 X240 Y0 G1...
Running firmware 412.01.. Connected tgfx to my tinyg v8 that I had previously setup via coolterm and had configured for "inch" mode.. Once tgfx/tinyg connected I checked all the settings.....
