How can I compile firmware for a V9 board board153v9k?

[bartona]

I have a Synthetos TinyG v9 board153v9k PCB, and I would like to put the latest g2core firmware on. Is this board supported as a target? Do I need to use the g2 firmware, or the original TinyG firmware for this board?

[justinclift]

From rough memory, as I've not used the v9 TinyG board myself, it does use g2core for it's firmware. Found a direct mention of things here, which confirms it:

    https://synthetos.com/topics/tinyg-v9

With your board, is it part of a known machine (eg a ShopBot of some model, etc)?

Asking because looking through the boards.mk file for potential compile targets, I'm not sure which one is close to the settings you'd be needing:

    https://github.com/synthetos/g2/blob/c684edcd38a18e4014860a9bf1ace1dc3b37285f/g2core/boards.mk

Note the machines there with an entry of BOARD=g2v9k. I think that "g2v9k" is your board. So, one of those machines is probably along the right lines. :wink:

[giseburt]

@justinclift is correct. g2v9k is the v9 you have.

If I may: how did you come to have a v9 board? I assume it’s in something. 😄

[scottnaylor]

Hello - I am in a similar situation - I have a g2 V9 board in my Printrbot Crawlbot. The original fw info below (unfortunately I can't find the original bin anymore either) [fb] firmware build 89.03 [fbs] firmware build " build" [fv] firmware version 0.98 [cv] configuration version 7.00 [hp] hardware platform 3.00 [hv] hardware version 0.00 [id] TinyG ID 0213-0215-d413