ha-dual-smart-thermostat
ha-dual-smart-thermostat copied to clipboard
The `dual_smart_thermostat` is an enhaced verion of generic thermostat implemented in Home Assistant. It uses several sensors and dedicated switches connected to a heater and air conditioning under th...
So I can't get the presets to work. This is how my config looks: ` - platform: dual_smart_thermostat initial_hvac_mode: "off" name: Kitchen heater: switch.hvac_w_heat cooler: switch.hvac_y_cool target_sensor: sensor.kitchen_temperature min_temp: 60...
It is possible to add fan hvac mode? It will be nice to have if someone have air condition with fan option.
Anytime I try to set the thermostat to auto to control both my AC unit and my heater is throws out an error: ``` Oct 18 02:08:44 1119n-ha-001 homeassistant[872]: #033[31m2022-10-17...
I'm trying to wrap my head around the behavior this component seems to take. Before is my config. ` platform: dual_smart_thermostat name: Virtual Bedroom heater: switch.bedroom_ac_heat cooler: switch.bedroom_ac_cool target_sensor: sensor.bedroom_temperature_sensor_temperature...
In heating mode, if I have the tolerance set to 1F and the precision to 0.1F, and the setpoint to 68F, it turns on at 66.9F, but turns off right...
I'm planning to use this as an extension to a less capable physical thermostat (heat only) But as the dual_smart_thermostat need the target_sensor to be a thermometer with state as...
Hi! The integration is working perfectly, but at boot I have this error logged by home assistant: ``` 2022-04-07 10:40:35 ERROR (MainThread) [homeassistant.components.climate] Error while setting up dual_smart_thermostat platform for...
When setting min_cycle_duration to either seconds: 120 or minutes: 2 I get the same results with my cooling turning off/on every few seconds if the temperature is close to the...
I have been using the Dual Smart Thermostat since a few months ago and I really love it. Recently I noticed something changed but I haven't been able to figure...
I use thermostat controls to control humidity instead of temperature, e.g. where the `sensor` entity is a humidity sensor, and the `switch` entities are a humidifier and a dehumidifier. ...