[bug][core] Issue using two identical Joystick for PTT

[KWB]

Comment KB: Not clear if this is a swift BUG, OR an issue because of the specific hardware. See the details linked in the comment below!!!!!

Using the following configuration :

Windows 10 Home Family Prepar3D 4.2 Swift 64-0.9.4.232 An Airbus A320 home cockpit composed of the following hardware : Two Skalarki A320 Sidestick for Cpt and F/O : https://www.skalarki-electronics.eu/onlineshop/product/240-side-stick-p-p.html This side stick use a leo bodnar card BU036A and are connected exactly the same manner on USB. Each PTT button are recognized as Button 21.

When configuring PTT for Cpt Sidestick, it also configure for F/O but you see only one hardware. (see screenshoot). Consequently, when pushing PTT on Cpt Sidestick, as it is not pushed on F/O, swift client interpreted it as pushed/unpushed PTT in loop.

The only way to work is to disable the F/O sidestick.

In my opinion, I think swift is not able to separate hardware by ID if you have twice the same.

[KWB]

Further details: https://dev.swift-project.org/T784#18226 https://discordapp.com/channels/539048679160676382/568904540808675350/719997455030288437

[ltoenning]

Can confirm that with two Logitech Attack 3.

I will investigate.