Sven Wegener

Sadly I had no success with GPIO44: ``` enable-gpio = ; ``` ``` $ hexdump /sys/firmware/devicetree/base/palmbus@1E000000/i2c@900/led-controller@30/enable-gpio 0000000 0000 0500 0000 2c00 0000 0000 000000c ``` ``` [ 2.575760] i2c-mt7621 1e000900.i2c:...

Increasing the sleep time does not change the behaviour. I've dug deeper into the OEM firmware with Ghidra and GPIO41 is used as a reset line to the MCU. The...

@blocktrron I've managed to get the ledbar working on the FlexHD. That are several changes to the driver necessary, can you take a look over the commits? Also I think...

> Awesome. Where did you get the missing information for the LED controller from? It took quite a bit of reading the disassembled code with Ghidra, but was quite fun...

> I don't feel duplicating driver files is a good practice... The git log of mediatek target shows codes were moved to generic in such cases. [bcf91fe](https://github.com/openwrt/openwrt/commit/bcf91fe8849bf4467637fd5570806837ba93dbd4) [cc49abc](https://github.com/openwrt/openwrt/commit/cc49abc06bca59911caf5b904c3181814636e4da) I've moved...

I'm the maintainer of Gentoo's PowerDNs packages and we're having glibc-2.34 available. It's not going to require a recompile, but behaves like `-D_FILE_OFFSET_BITS=64` in that it is opt-in und uses...

I'm still in process of testing, so consider this a draft for now.

I built pdns-recursor-4.5.6 with these changes in a 32-bit container. It compiles and runs fine, but I think further testing would be good.

From my end this should be it. I've tested both pdns and pdns-recursor in an 32-bit container with glibc-2.34 and both compile and run fine.

The kernel was 64-bit.