Pause time showing minutes remaining as seconds M117

[kentishduffer]

2.4.58.5

Windows 11 Creality Ender3 v2

When using the Pause function (M600) with M117 enabled the 'Pause in hms' shows seconds instead of minutes.

Create a colour change with M600. In Printer Settings select 'Print Remaining Times' and Method M73 & M117 Slice object and save GCode. Print object. Display reads seconds instead of minutes.

e.g. Display should read 0h13m0s Display is showing 0h0m13s

See attached screenshot of GCode

[kentishduffer]

Can anyone help with this?

[luismanson]

I've found the same issue, however I did a filament change some prints ago and the time is still shown as reaming time. @kentishduffer did you try Prusa slicer?

[kentishduffer]

@luismanson I haven’t tried Prusa. The remaining time is correct, it’s just the pause time which is incorrect.

[Rneil-ca]

I am see this issue as well. The first pause in time is correct, but after that it shifts:

M73 P0 R547 M73 C382 M117 Pause in 6h22m25s / 9h7m7s ;TYPE:Custom ; custom gcode: start_gcode START_PRINT BED=70 EXT=215 ; custom gcode end: start_gcode ;_TOOLCHANGE 0 M107 ; disable fan ;LAYER_CHANGE ;Z:0.2 ;HEIGHT:0.2 ; custom gcode: before_layer_gcode ;BEFORE_LAYER_CHANGE ;0.2 G92 E0 ; custom gcode end: before_layer_gcode

G1 E-0.2 F2100 ; retract M73 P0 R546 M73 C6 M117 Pause in 0h6m22s / 9h6m47s

[kentishduffer]

@supermerill Could you have a look at this issue please? Thanks