redumper icon indicating copy to clipboard operation
redumper copied to clipboard

redumper cannot dump a multi-session CD because it does not recognize the PX-W1210TA correctly.

Open Lumcikeqla opened this issue 1 year ago • 11 comments

As the title says, Redumper does not recognize PX-W1210TA, so I cannot dump with Enhanced CD MediaType.

Screenshots and logs: GoM.log Firmware

Lumcikeqla avatar Sep 22 '24 15:09 Lumcikeqla

Most likely it's not recognized correctly because your USB enclosure is editing drive vendor and device string. Do you have any other adapters to try?

superg avatar Sep 22 '24 15:09 superg

I don't have any other adapters to try, so I bought one, I'll try it when it arrives.

Lumcikeqla avatar Sep 25 '24 07:09 Lumcikeqla

I will report back to you again. The device I used when I first uploaded the Log was a UD-301S, and I also tried with a UD-303SM1 from the same manufacturer that I had on hand, with the same results.

The USB-CVIDE6 I purchased this time is the Innostor IS611 chipset recommended in the Wiki, but it was not recognized by the PC in the first place. I have a PX-755 and a PX-716, and both of them are successfully recognized by Redumper using the devices with the model numbers listed here.

Lumcikeqla avatar Sep 30 '24 14:09 Lumcikeqla

By the way - you can just try to force drive options on the command line (--drive-* options), use the settings from here: https://github.com/superg/redumper/blob/main/drive.ixx#L153

superg avatar Oct 13 '24 17:10 superg

Can you give me an example of how to type the command?

Lumcikeqla avatar Oct 15 '24 13:10 Lumcikeqla

something like redumper --drive-type=PLEXTOR --drive-read-offset=99 --drive-c2-shift=294 --drive-pregap-start=-75 --drive-read-method=D8 --drive-sector-order=DATA_C2_SUB

superg avatar Oct 15 '24 14:10 superg

I tried that command on both audio CDs and multi-session CDs, but I could not Dump them as shown in the image. When I go through MPF, I am able to Dump the Audio CD. dump_test

Lumcikeqla avatar Oct 18 '24 01:10 Lumcikeqla

Hmm, could you try redumper --drive-type=PLEXTOR --drive-read-offset=99 --drive-c2-shift=294 --drive-pregap-start=-75 --drive-read-method=D8 --drive-sector-order=DATA_SUB and let me know if it's any better?

superg avatar Oct 18 '24 12:10 superg

Dump started, but with different results than the other drives. I have uploaded the logs to Mega.nz so please check. All uploaded logs are the same disk results.

https://mega.nz/folder/HcJnXabL#6zy6KIV7uJb-YqcLORaIBw

Lumcikeqla avatar Oct 19 '24 06:10 Lumcikeqla

Logs look ok, Track 1 doesn't match and also 1210 found some non zero pre-gap data, weird but can't tell more without experimenting with the drive here. Anyways drive without C2 support is useless for redump purpose.

superg avatar Oct 19 '24 19:10 superg

Okay, let me know if there is anything I can do to help. Thank you.

Lumcikeqla avatar Oct 20 '24 12:10 Lumcikeqla