diyBMSv4ESP32
diyBMSv4ESP32 copied to clipboard
stuartpittaway
diyBMS v4 code for the ESP32 and new controller hardware
Hello Stuart, i used many id 3 Battery and i have also the original CMU from VW and i see that the can bus is hacked. See here: https://github.com/anikrooz/housebatt https://github.com/Tom-evnut/VW-bms/tree/master/VWBMSV2...
**Describe the bug** It's very difficult to manage the system when on the home page and modules page the number in bank number and then the module number increments, for...
**Describe the bug** I have had a problem with an all-in-one. Communication through module 2 has failed. The red leds were fixed, without flashing. Burning energy. Unbalancing the 36S batteries....
**Describe the bug** Quite often lately, up to three times a day, the Wi-Fi connection between the controller and the Wi-Fi network is lost, and the controller cannot be accessed....
A great feature would be user authentication in the web server You could always see all the values or screens of the BMS, but if you want to change something,...
I would like to have an additional temperature rule, actually the same as there already is, just two extra rules: - "Module temperature (internal)" - "Cell temperature (external)" This would...
See discussion here.. https://community.openenergymonitor.org/t/does-the-diybms-support-rs485-to-communicate-with-growatt-sph-hybrid-inverters/24823/2 and code.. https://community.openenergymonitor.org/uploads/short-url/pk8blgMgmx0aZPq0WGNVdLKFcp6.ino
@stuartpittaway I learned that some Voltronic models such as the King and MAX series use WECO and SOL (Soltaro) CAN-BUS in the BMS setting. I checked the hardware on my...
It would be very useful to have automatic detection of the controllers selected baud rate, this would prevent needing to reflash firmware when it changes.
Metadata
Owner
Metadata
diyBMS v4 code for the ESP32 and new controller hardware