Ender 3 v2 Linear Rail Modifications

[RichardTHF]

Hi there,

You said to let you know if anyone came across an issue with this, so I thought I would let you know.

I have modified my Ender 3 V2 with the Linear Rail upgrade and the "upgraded" mounting plate is actually 5mm so thicker than stock 2mm plate.

Not an issue, I just modified the STL to make it fit!

Thank you so much for making this, saved me a lot of time having to make one from scratch :)

[strayr]

You should probably look at the ender 3 switchwire conversion, that's the intended next step here.

https://github.com/SW-Conversion/mod-regisistry

I recommend looking at DaRK_dOg's version 2.

On Sat, 7 Jan 2023, 15:28 Richard Davies, @.***> wrote:

Hi there,

You said to let you know if anyone came across an issue with this, so I thought I would let you know.

I have modified my Ender 3 V2 with the Linear Rail upgrade and the "upgraded" mounting plate is actually 5mm so thicker than stock 2mm plate.

Not an issue, I just modified the STL to make it fit!

Thank you so much for making this, saved me a lot of time having to make one from scratch :)

— Reply to this email directly, view it on GitHub https://github.com/strayr/voron-afterburner-ender3/issues/4, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKIYU2HZIK2463S7KWH7T53WRGDRVANCNFSM6AAAAAATUAFIBA . You are receiving this because you are subscribed to this thread.Message ID: @.***>