Giammarco

I've understood you have the CarlitoX version. Which firmware is running? Looking at the webui it seems based on ODI firmware. In case can you share your MTD dump? Thx...

still same problem of other firmwares, the MEID 171 is not honored. Only way to bring PPPoE up is to using the VID in MEID 84 :(

> GPON should be Layer 3, only router MAC Address need to change for DHCP Server authenticate the router. usually MAC address is used on the LAN side. May be...

just for information, that firmware doesn't seems stable when the stick run in HiSGMII mode. I had to revert back on 220404 that doesn't have link loss behaviour

> since I know `nv setenv sw_commit` `sw_active` I simply switch 😄 yep I know ;) hope they don't screw up the HiSGMII part!!

> wow, this hybrid can switch mode between Router and Bridge Mode ? looks like this firmware still doesn't honors `DEVICE_TYPE` setting it to `0` or `1` it's the same,...

they have also changed the WebUI (looks very weird..)

I confirm this firmware has same behaviour of 2107XX, so I can bring up PPPoE using my "swapped" VLAN 835 instead of native 100. Now @Anime4000 you should check if...

> New Firmware V220527! That's support pppoe or ipoe. It still need mac key. [M114_sfp_ODI_hybrid_220527.zip](https://github.com/Anime4000/RTL960x/files/8791246/M114_sfp_ODI_hybrid_220527.zip) just a question (if you know): MAC_KEY is needed also to bring up PPPoE\IPoE? I...

> TWCGPON657 So we cannot use TWCGPON657 firmware on V2801F? TWCGPON657 isn't available everywhere :(