django-socketio
django-socketio copied to clipboard
WebSockets for Django
.. image:: https://secure.travis-ci.org/stephenmcd/django-socketio.png?branch=master :target: http://travis-ci.org/#!/stephenmcd/django-socketio
Created by Stephen McDonald <http://twitter.com/stephen_mcd>
_
State of django-socketio
django-socketio is currently bound to socket.io 0.6, which is considerably out of date. It's fully functional, but some browsers now have newer implementations of WebSockets, and so alternative socket.io transports are fallen back to in these cases.
Work is currently underway to bring django-socketio up to date with the latest gevent-socktio, which has just recently started to support socket.io 0.8
Follow this thread for more info:
https://github.com/stephenmcd/django-socketio/issues/19
Introduction
django-socketio is a BSD licensed
_ Django
_ application that
brings together a variety of features that allow you to use
WebSockets
_ seamlessly with any Django project.
django-socketio was inspired by Cody Soyland
's introductory
blog post
on using Socket.IO
_ and gevent
_ with Django, and
made possible by the work of Jeffrey Gelens'
_ gevent-websocket
_
and gevent-socketio
_ packages.
The features provided by django-socketio are:
- Installation of required packages from
PyPI
_ - A management command for running gevent's pywsgi server with auto-reloading capabilities
- A channel subscription and broadcast system that extends Socket.IO allowing WebSockets and events to be partitioned into separate concerns
- A
signals
_-like event system that abstracts away the various stages of a Socket.IO request - Support for out-of-band (non-event) broadcasts
- The required views, urlpatterns, templatetags and tests for all the above
Upgrading
Prior to version 0.3, the message argument sent to each of the event handlers was always a Python list, regardless of the data type that was used for sending data. As of 0.3, the message argument matches the data type being sent via JavaScript.
Installation
Note that if you've never installed gevent, you'll first need to install the libevent development library. You may also need the Python development library if not installed. This can be achieved on Debian based sytems with the following commands::
$ sudo apt-get install python-dev
$ sudo apt-get install libevent-dev
or on OSX using Homebrew
_ (with Xcode installed)::
$ brew install libevent
$ export CFLAGS=-I/brew/include
or on OSX using macports
::
$ sudo port install libevent
$ CFLAGS="-I /opt/local/include -L /opt/local/lib" pip install django-socketio
The easiest way to install django-socketio is directly from PyPi using
pip
_ by running the following command, which will also attempt to
install the dependencies mentioned above::
$ pip install -U django-socketio
Otherwise you can download django-socketio and install it directly from source::
$ python setup.py install
Once installed you can then add django_socketio
to your
INSTALLED_APPS
and django_socketio.urls
to your url conf::
urlpatterns += [
url("", include('django_socketio.urls')),
]
The client-side JavaScripts for Socket.IO and its extensions can then
be added to any page with the socketio
templatetag::
<head>
{% load socketio_tags %}
{% socketio %}
<script>
var socket = new io.Socket();
socket.connect();
// etc
</script>
</head>
Running
The runserver_socketio
management command is provided which will
run gevent's pywsgi server which is required for supporting the type of
long-running request a WebSocket will use::
$ python manage.py runserver_socketio host:port
Note that the host and port can also configured by defining the following settings in your project's settings module:
* ``SOCKETIO_HOST`` - The host to bind the server to.
* ``SOCKETIO_PORT`` - The numeric port to bind the server to.
These settings are only used when their values are not specified as
arguments to the runserver_socketio
command, which always takes
precedence.
.. note::
On UNIX-like systems, in order for the ``flashsocket`` transport
fallback to work, root privileges (eg by running the above command
with ``sudo``) are required when running the server. This is due to
the `Flash Policy Server`_ requiring access to a `low port`_ (843).
This isn't strictly required for everything to work correctly, as
the ``flashsocket`` transport is only used as one of several
fallbacks when WebSockets aren't supported by the browser.
When running the runserver_socketio
command in production, you'll
most likely want to use some form of process manager, like
Supervisor
_ or any of the other alternatives.
Channels
The WebSocket implemented by gevent-websocket provides two methods for
sending data to other clients, socket.send
which sends data to the
given socket instance, and socket.broadcast
which sends data to all
socket instances other than itself.
A common requirement for WebSocket based applications is to divide
communications up into separate channels. For example a chat site may
have multiple chat rooms and rather than using broadcast
which
would send a chat message to all chat rooms, each room would need a
reference to each of the connected sockets so that send
can be
called on each socket when a new message arrives for that room.
django-socketio extends Socket.IO both on the client and server to provide channels that can be subscribed and broadcast to.
To subscribe to a channel client-side in JavaScript use the
socket.subscribe
method::
var socket = new io.Socket();
socket.connect();
socket.on('connect', function() {
socket.subscribe('my channel');
});
Once the socket is subscribed to a channel, you can then
broadcast to the channel server-side in Python using the
socket.broadcast_channel
method::
socket.broadcast_channel("my message")
Broadcast and Send Methods
Each server-side socket instance contains a handful of methods
for sending data. As mentioned above, the first two methods are
implemented by gevent-socketio
_:
-
socket.send(message)
- Sends the given message directly to the socket. -
socket.broadcast(message)
- Sends the given message to all other sockets.
The remaning methods are implemented by django-socketio.
-
socket.broadcast_channel(message, channel=None)
- Sends the given message to all other sockets that are subscribed to the given channel. If no channel is given, all channels that the socket is subscribed to are used. the socket. -
socket.send_and_broadcast(message)
- Shortcut that sends the message to all sockets, including the sender. -
socket.send_and_broadcast_channel(message, channel=None)
- Shortcut that sends the message to all sockets for the given channel, including the sender.
The following methods can be imported directly from
django_socketio
for broadcasting and sending out-of-band (eg: not
in response to a socket event). These methods map directly to the same
methods on a socket instance, and in each case an appropriate connected
socket will be chosen to use for sending the message, and the
django_socketio.NoSocket
exception will be raised if no connected
sockets exist.
-
django_socketio.broadcast(message)
-
django_socketio.broadcast_channel(message, channel)
-
django_socketio.send(session_id, message)
Note that with the send
method, the socket is identified by its
session ID, accessible via socket.session.session_id
. This is a
WebSocket session ID and should not be confused with a Django session
ID which is different.
Events
The django_socketio.events
module provides a handful of events
that can be subscribed to, very much like connecting receiver
functions to Django signals. Each of these events are raised
throughout the relevant stages of a Socket.IO request. These events
represent the main approach for implementing your socket handling
logic when using django-socketio.
Events are subscribed to by applying each event as a decorator to your event handler functions::
from django_socketio.events import on_message
@on_message
def my_message_handler(request, socket, context, message):
...
Where should these event handlers live in your Django project? They
can go anywhere, so long as they're imported by Django at startup
time. To ensure that your event handlers are always loaded, you can
put them into a module called events.py
in one of your apps listed
in Django's INSTALLED_APPS
setting. django-socketio looks for these
modules, and will always import them to ensure your event handlers are
loaded.
Each event handler takes at least three arguments: the current Django
request
, the Socket.IO socket
the event occurred for, and a
context
, which is simply a dictionary that can be used to persist
variables across all events throughout the life-cycle of a single
WebSocket connection.
-
on_connect(request, socket, context)
- occurs once when the WebSocket connection is first established. -
on_message(request, socket, context, message)
- occurs every time data is sent to the WebSocket. Takes an extramessage
argument which contains the data sent. -
on_subscribe(request, socket, context, channel)
- occurs when a channel is subscribed to. Takes an extrachannel
argument which contains the channel subscribed to. -
on_unsubscribe(request, socket, context, channel)
- occurs when a channel is unsubscribed from. Takes an extrachannel
argument which contains the channel unsubscribed from. -
on_error(request, socket, context, exception)
- occurs when an error is raised. Takes an extraexception
argument which contains the exception for the error. -
on_disconnect(request, socket, context)
- occurs once when the WebSocket disconnects. -
on_finish(request, socket, context)
- occurs once when the Socket.IO request is finished.
Like Django signals, event handlers can be defined anywhere so long as they end up being imported. Consider adding them to their own module that gets imported by your urlconf, or even adding them to your views module since they're conceptually similar to views.
Binding Events to Channels
All events other than the on_connect
event can also be bound to
particular channels by passing a channel
argument to the event
decorator. The channel argument can contain a regular expression
pattern used to match again multiple channels of similar function.
For example, suppose you implemented a chat site with multiple rooms. WebSockets would be the basis for users communicating within each chat room, however you may want to use them elsewhere throughout the site for different purposes, perhaps for a real-time admin dashboard. In this case there would be two distinct WebSocket uses, with the chat rooms each requiring their own individual channels.
Suppose each chat room user subscribes to a channel client-side using the room's ID::
var socket = new io.Socket();
var roomID = 42;
socket.connect();
socket.on('connect', function() {
socket.subscribe('room-' + roomID);
});
Then server-side the different message handlers are bound to each type of channel::
@on_message(channel="dashboard")
def my_dashboard_handler(request, socket, context, message):
...
@on_message(channel="^room-")
def my_chat_handler(request, socket, context, message):
...
Logging
The following setting can be used to configure logging:
* ``SOCKETIO_MESSAGE_LOG_FORMAT`` - A format string used for logging
each message sent via a socket. The string is formatted using
interpolation with a dictionary. The dictionary contains all the
keys found in Django's ``request["META"]``, as well as ``TIME``
and ``MESSAGE`` keys which contain the time of the message and
the message contents respectively. Set this setting to ``None``
to disable message logging.
Chat Demo
The "hello world" of WebSocket applications is naturally the chat
room. As such django-socketio comes with a demo chat application
that provides examples of the different events, channel and broadcasting
features available. The demo can be found in the example_project
directory of the django_socketio
package. Note that Django 1.3 or
higher is required for the demo as it makes use of Django 1.3's
staticfiles
app.
.. _BSD licensed
: http://www.linfo.org/bsdlicense.html
.. _Django
: http://djangoproject.com/
.. _WebSockets
: http://en.wikipedia.org/wiki/WebSockets
.. _Cody Soyland
: http://codysoyland.com/
.. _blog post
: http://codysoyland.com/2011/feb/6/evented-django-part-one-socketio-and-gevent/
.. _Socket.IO
: http://socket.io/
.. _Jeffrey Gelens'
: http://www.gelens.org/
.. _gevent
: http://www.gevent.org/
.. _gevent-websocket
: https://bitbucket.org/Jeffrey/gevent-websocket/
.. _gevent-socketio
: https://bitbucket.org/Jeffrey/gevent-socketio/
.. _PyPI
: http://pypi.python.org/
.. _signals
: https://docs.djangoproject.com/en/dev/topics/signals/
.. _Homebrew
: http://mxcl.github.com/homebrew/
.. _pip
: http://www.pip-installer.org/
.. _Supervisor
: http://supervisord.org/
.. _Flash Policy Server
: http://www.adobe.com/devnet/flashplayer/articles/socket_policy_files.html
.. _low port
: http://www.staldal.nu/tech/2007/10/31/why-can-only-root-listen-to-ports-below-1024/