Stephan Schulz

@agjunyent thanks for the advice. ultimately i need to reproduce this wave behaviour http://lozano-hemmer.com/wavefunction.php i have it working partially were every actuator is following a master oscillator which runs on...

thanks for make this code public. has RDM been implemented yet?

Hi. Thanks for your reply. I have an Enttec Storm8 artnet device https://www.enttec.com/product/uncategorized/storm-8-8-universe-ethernet-to-dmx-gateway/ and send DMX to these dimmers https://www.sunricher.com/din-rail-mounted-dmx512-decoder-sr-2103din.html#product_tabs_resources Until now I always set their addresses by hand, but...

I am still learning about RDM. I did not realize RDMNet is different from regular RDM over artnet. In my case I am just interested in sending regular RDM messages...

The main wiring is done by simply plugging the boards in to the [Quad 2x2 FeatherWing Kit](https://www.adafruit.com/product/4253 ) I did not want to use the [STEMMA QT connector](https://learn.adafruit.com/introducing-adafruit-stemma-qt/what-is-stemma-qt) on the...

Thanks for your reply. I am not really sure how to go about this correctly but here is what I did and it seems to produce a Residual of 0.106144...

Or is the problem not that the markers are beyond the fixture base, but rather are on the other side of the blue ground plan grid? I guess I will...

I moved the model above the blue ground plane and it seems the calibration is more reliable. It's still not dead-on. I do wonder since am also scanning the mounted...

Where do the defines `HAS_OFXASSETS` and `HAS_OFXCVGUI` get set? I can not see `#define HAS_OFXCVGUI` anywhere for example. But I guess because I am just trying to compile the `Example-MovingHead`...

yes communication is still possible and works reliable. my problem is more about the lack of getting any `port_info.description`, which now returns `n/a`