Supported devices

[halacs]

Hi,

I have a ProMatic 3 door opener motor. Is it supported by this solution?

Thanks!

[stephan192]

I'm not sure but according to https://github.com/stephan192/hoermann_door/issues/18#issuecomment-1485815572 i would guess NO. Your door must be compatible with the "UAP 1" because my board emulates a "UAP 1".

[14yannick]

Hi @stephan192 is right it's not compatible. I have a section in the Document how you can have the functionality using a relay and reed sensors.

[4920441]

Hi,

Hörmann hast at least two different systems it seems.... My Supramatic 4 needs the uap-1-HCP version:-(

https://www.tor7.de/hoermann-universaladapterplatine-uap-1-hcp

Is your project able to use that one too, somehow?

Why do they invent the wheel over and over again..... a garage door should be a very finite machine....

Cheers

[14yannick]

Check this repo for uap-hcp. This need much easier hardware. You can get preassembled boards from tysonpower or I can also assist you.

[4920441]

Hi, thanks for that hint.

If someone iss interested in the board I've purchased, please let me now - its sits here as it was delivered.

I think there is no reason to modify it, when most of the components are not needed for my version, or is there?

Thaanks a lot for clearyfying - really thought I hat a supramatic 3 in my garage......;-)

Cheers

[github-actions[bot]]

This issue is stale because it has been open 90 days with no activity. Remove stale label or comment or this will be closed in 7 days.

[github-actions[bot]]

This issue was closed because it has been stalled for 7 days with no activity.