thinThickBarlineSeparation not listed in engraving defaults

[craigvear]

I've noticed thinThickBarlineSeparation is not listed in the engraving defaults. Is this normal?

[rettinghaus]

Should the space between two thin barlines be different?

[craigvear]

Looking at the engraving defaults in SMuFL there are several listed for barlines, and not all are in Bravura:

"thinBarlineThickness"	The thickness of a thin barline, e.g. a normal barline, or each of the lines of a double barline
"thickBarlineThickness"	The thickness of a thick barline, e.g. in a final barline or a repeat barline
"dashedBarlineThickness"	The thickness of a dashed barline
"dashedBarlineDashLength"	The length of the dashes to be used in a dashed barline
"dashedBarlineGapLength"	The length of the gap between dashes in a dashed barline
"barlineSeparation"	The default distance between multiple thin barlines when locked together, e.g. between two thin barlines making a double barline, measured from the right-hand edge of the left barline to the left-hand edge of the right barline.
"thinThickBarlineSeparation"	The default distance between a pair of thin and thick barlines when locked together, e.g. between the thin and thick barlines making a final barline, or between the thick and thin barlines making a start repeat barline.
"repeatBarlineDotSeparation"	The default horizontal distance between the dots and the inner barline of a repeat barline, measured from the edge of the dots to the edge of the barline.

[rettinghaus]

Ok, thanks for the clarification. I overlooked thinThickBarlineSeparation.