sst-elements
sst-elements copied to clipboard
Published
20 hours ago •
sstsimulator
sstsimulator
Ubuntu test elements failure
Ran 479 tests in 1151.221s
FAILED (failures=11, skipped=19)
=== TEST RESULTS BREAKDOWN ===========================================
testsuite_default_Messier.testcase_Messier_Component
- FAILED : test_Messier_gupsgen (testsuite_default_Messier.testcase_Messier_Component)
- FAILED : test_Messier_gupsgen_2RANKS (testsuite_default_Messier.testcase_Messier_Component)
- FAILED : test_Messier_gupsgen_fastNVM (testsuite_default_Messier.testcase_Messier_Component)
- FAILED : test_Messier_stencil3dbench_messier (testsuite_default_Messier.testcase_Messier_Component)
- FAILED : test_Messier_streambench_messier (testsuite_default_Messier.testcase_Messier_Component)
testsuite_default_Samba.testcase_Samba_Component
- FAILED : test_Samba_gupsgen_mmu (testsuite_default_Samba.testcase_Samba_Component)
- FAILED : test_Samba_gupsgen_mmu_4KB (testsuite_default_Samba.testcase_Samba_Component)
- FAILED : test_Samba_gupsgen_mmu_three_levels (testsuite_default_Samba.testcase_Samba_Component)
- FAILED : test_Samba_stencil3dbench_mmu (testsuite_default_Samba.testcase_Samba_Component)
- FAILED : test_Samba_streambench_mmu (testsuite_default_Samba.testcase_Samba_Component)
testsuite_default_cacheTracer.testcase_cacheTracer_Component
- FAILED : test_cacheTracer_1 (testsuite_default_cacheTracer.testcase_cacheTracer_Component)
=== TEST RESULTS SUMMARY =============================================
Tests Run = 479
----------------------------------------
Passing = 449
Failures = 11
Skipped = 19
Errors = 0
Expected Failures = 0
Unexpected Successes = 0
Testing Notes = 0
----------------------------------------------------------------------
-- Total Test Time = 0 Hours, 19 Minutes, 11.222 Seconds --
====================
== TESTING FAILED ==
====================
The above message was received when running sst-test-elements. The sst-test-core ran fine. Does this mean I did not install SST elements correctly or is there an issue on SST side?
Above the summary of failed tests in the output, you should be able to find the reasons that each test failed. If you can post those, we may be able to help narrow down what's going on.
@prateek22sri Do you have any new information? Which version of Ubuntu? What is your configure.log?
My work didn't get affected by this issue so never tried fixing it. My ubuntu version is 22.04. Here's my config.log:
Last login: Wed Jul 12 15:58:05 on ttys001
1 This file contains any messages produced by compilers while
2 running configure, to aid debugging if configure makes a mistake.
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
7 $ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-eleme nts-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-i nstall
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
21
22 /bin/arch = x86_64
"config.log" 4565L, 169576B 1,1 Top
1 This file contains any messages produced by compilers while
2 running configure, to aid debugging if configure makes a mistake.
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
21
22 /bin/arch = x86_64
23 /usr/bin/arch -k = unknown
24 /usr/convex/getsysinfo = unknown
25 /usr/bin/hostinfo = unknown
26 /bin/machine = unknown
27 /usr/bin/oslevel = unknown
28 /bin/universe = unknown
29
30 PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
31 PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
32 PATH: /home/pratsriv/softwares/upcxx/install/bin
33 PATH: /home/pratsriv/softwares/musl/mybuild/bin
34 PATH: /home/pratsriv/sst/sst-elements/install/bin
35 PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
36 PATH: /home/pratsriv/softwares/upcxx/install/bin
37 PATH: /home/pratsriv/softwares/musl/mybuild/bin
38 PATH: /home/pratsriv/torch/install/bin
39 PATH: /home/pratsriv/torch/install/bin
40 PATH: /home/pratsriv/.local/bin
41 PATH: /home/pratsriv/sst/sst-elements/install/bin
42 PATH: /home/pratsriv/sst/sst-core/install/bin
43 PATH: /home/pratsriv/softwares/upcxx/install/bin
44 PATH: /home/pratsriv/softwares/musl/mybuild/bin
45 PATH: /usr/local/sbin
46 PATH: /usr/local/bin
47 PATH: /usr/sbin
48 PATH: /usr/bin
49 PATH: /sbin
50 PATH: /bin
51 PATH: /usr/games
52 PATH: /usr/local/games
53 PATH: /snap/bin
54
57 ## Core tests. ##
58 ## ----------- ##
59
60 configure:2789: checking for a BSD-compatible install
61 configure:2857: result: /usr/bin/install -c
64 configure:3074: checking for a thread-safe mkdir -p
65 configure:3113: result: /usr/bin/mkdir -p
66 configure:3120: checking for gawk
67 configure:3150: result: no
68 configure:3120: checking for mawk
69 configure:3136: found /usr/bin/mawk
70 configure:3147: result: mawk
71 configure:3158: checking whether make sets $(MAKE)
72 configure:3180: result: yes
73 configure:3209: checking whether make supports nested variables
74 configure:3226: result: yes
75 configure:3296: checking how to create a pax tar archive
76 configure:3307: tar --version
77 tar (GNU tar) 1.34
78 Copyright (C) 2021 Free Software Foundation, Inc.
79 License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl. html>.
80 This is free software: you are free to change and redistribute it.
81 There is NO WARRANTY, to the extent permitted by law.
82
83 Written by John Gilmore and Jay Fenlason.
84 configure:3310: $? = 0
85 configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$t ardir" >conftest.tar
86 configure:3353: $? = 0
87 configure:3357: tar -xf - <conftest.tar
88 configure:3360: $? = 0
89 configure:3362: cat conftest.dir/file
89,1 1%
1 This file contains any messages produced by compilers while
2 running configure, to aid debugging if configure makes a mistake.
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
7 $ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-eleme nts-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-i nstall
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
21
22 /bin/arch = x86_64
-- VISUAL LINE -- 1,1 Top
4542 #define LT_LIBEXT "a"
4543 #define LT_LIBPREFIX "lib"
4544 #define NVDIMMSIM_LIBDIR ""
4545 #define PINTOOL_EXECUTABLE ""
4546 #define HAVE_SHM 1
4547 #define HAVE_LIBZ 1
4548 #define RAMULATOR_LIBDIR ""
4549 #define DRAMSIM_LIBDIR ""
4550 #define DRAMSIM3_LIBDIR ""
4551 #define HBMDRAMSIM_LIBDIR ""
4552 #define HYBRIDSIM_LIBDIR ""
4553 #define GOBLIN_HMCSIM_LIBDIR ""
4554 #define NVDIMMSIM_LIBDIR ""
4555 #define FDSIM_LIBDIR ""
4556 #define HAVE_LIBZ 1
4557 #define STAKE_LIBDIR ""
4558 #define HAVE_LIBZ 1
4559 #define PINTOOL_EXECUTABLE ""
4560 #define HAVE_SHM 1
4561 #define SSTELEMENTS_GIT_BRANCH "N/A"
4562 #define SSTELEMENTS_GIT_HEADSHA "12.1.0"
4563 #define SSTELEMENTS_GIT_COMMITCOUNT "0"
4564
4565 configure: exit 0
-- VISUAL LINE -- 4565,1 Bot
*** System restart required ***
Last login: Thu Jun 15 14:37:26 2023 from 182.69.183.64
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
7 $ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-eleme nts-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-i nstall
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
21
22 /bin/arch = x86_64
4565 lines yanked 1,1 Top
1 This file contains any messages produced by compilers while
2 running configure, to aid debugging if configure makes a mistake.
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
7 $ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elemee
nts-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-ii
nstall
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
1,1 Top
1 This file contains any messages produced by compilers while
2 running configure, to aid debugging if configure makes a mistake.
3
4 It was created by SST Elements Library configure 12.1.0, which was
5 generated by GNU Autoconf 2.69. Invocation command line was
6
7 $ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
8
9 ## --------- ##
10 ## Platform. ##
11 ## --------- ##
12
13 hostname = ccal03
14 uname -m = x86_64
15 uname -r = 5.15.0-57-generic
16 uname -s = Linux
17 uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
18
19 /usr/bin/uname -p = x86_64
20 /bin/uname -X = unknown
21
22 /bin/arch = x86_64
23 /usr/bin/arch -k = unknown
24 /usr/convex/getsysinfo = unknown
25 /usr/bin/hostinfo = unknown
26 /bin/machine = unknown
27 /usr/bin/oslevel = unknown
28 /bin/universe = unknown
29
30 PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
31 PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
32 PATH: /home/pratsriv/softwares/upcxx/install/bin
33 PATH: /home/pratsriv/softwares/musl/mybuild/bin
34 PATH: /home/pratsriv/sst/sst-elements/install/bin
35 PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
36 PATH: /home/pratsriv/softwares/upcxx/install/bin
37 PATH: /home/pratsriv/softwares/musl/mybuild/bin
38 PATH: /home/pratsriv/torch/install/bin
39 PATH: /home/pratsriv/torch/install/bin
40 PATH: /home/pratsriv/.local/bin
41 PATH: /home/pratsriv/sst/sst-elements/install/bin
42 PATH: /home/pratsriv/sst/sst-core/install/bin
43 PATH: /home/pratsriv/softwares/upcxx/install/bin
44 PATH: /home/pratsriv/softwares/musl/mybuild/bin
45 PATH: /usr/local/sbin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
:set nonumber 1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptt
x-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:3997: checking for suffix of executables
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result:
configure:4052: checking whether we are cross compiling
configure:4060: gcc -o conftest conftest.c >&5
configure:4064: $? = 0
configure:4071: ./conftest
configure:4075: $? = 0
configure:4090: result: no
configure:4095: checking for suffix of object files
configure:4117: gcc -c conftest.c >&5
configure:4121: $? = 0
configure:4142: result: o
configure:4146: checking whether we are using the GNU C compiler
configure:4165: gcc -c conftest.c >&5
configure:4165: $? = 0
configure:4174: result: yes
configure:4183: checking whether gcc accepts -g
configure:4203: gcc -c -g conftest.c >&5
configure:4203: $? = 0
configure:4244: result: yes
configure:4261: checking for gcc option to accept ISO C89
configure:4324: gcc -c -g -O2 conftest.c >&5
configure:4324: $? = 0
configure:4337: result: none needed
configure:4362: checking whether gcc understands -c and -o together
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4399: result: yes
configure:4418: checking dependency style of gcc
configure:4529: result: gcc3
configure:4553: checking dependency style of gcc
configure:4662: result: gcc3
configure:4726: checking for gcc
configure:4753: result: gcc
configure:4982: checking for C compiler version
configure:4991: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5002: $? = 0
configure:4991: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptt
x-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5002: $? = 0
configure:4991: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:3997: checking for suffix of executables
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result:
configure:4052: checking whether we are cross compiling
configure:4060: gcc -o conftest conftest.c >&5
configure:4064: $? = 0
configure:4071: ./conftest
configure:4075: $? = 0
configure:4090: result: no
configure:4095: checking for suffix of object files
configure:4117: gcc -c conftest.c >&5
configure:4121: $? = 0
configure:4142: result: o
configure:4146: checking whether we are using the GNU C compiler
configure:4165: gcc -c conftest.c >&5
configure:4165: $? = 0
configure:4174: result: yes
configure:4183: checking whether gcc accepts -g
configure:4203: gcc -c -g conftest.c >&5
configure:4203: $? = 0
configure:4244: result: yes
configure:4261: checking for gcc option to accept ISO C89
configure:4324: gcc -c -g -O2 conftest.c >&5
configure:4324: $? = 0
configure:4337: result: none needed
configure:4362: checking whether gcc understands -c and -o together
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4399: result: yes
configure:4418: checking dependency style of gcc
configure:4529: result: gcc3
configure:4553: checking dependency style of gcc
configure:4662: result: gcc3
configure:4726: checking for gcc
configure:4753: result: gcc
configure:4982: checking for C compiler version
configure:4991: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5002: $? = 0
configure:4991: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5002: $? = 0
configure:4991: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:4991: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:5006: checking whether we are using the GNU C compiler
configure:5034: result: yes
configure:5043: checking whether gcc accepts -g
configure:5104: result: yes
configure:5121: checking for gcc option to accept ISO C89
configure:5197: result: none needed
configure:5222: checking whether gcc understands -c and -o together
configure:5259: result: yes
configure:5278: checking dependency style of gcc
configure:5389: result: gcc3
configure:5405: checking for gcc option to accept ISO C99
configure:5554: gcc -c -g -O2 conftest.c >&5
configure:5554: $? = 0
configure:5567: result: none needed
configure:5583: checking for inline
configure:5599: gcc -c -g -O2 conftest.c >&5
configure:5599: $? = 0
configure:5607: result: inline
configure:5625: checking whether make sets $(MAKE)
configure:5647: result: yes
configure:5715: checking for g++
configure:5731: found /usr/bin/g++
configure:5742: result: g++
configure:5769: checking for C++ compiler version
configure:5778: g++ --version >&5
g++ (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5789: $? = 0
configure:5778: g++ -v >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5789: $? = 0
configure:5778: g++ -V >&5
g++: error: unrecognized command-line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5778: g++ -qversion >&5
g++: error: unrecognized command-line option '-qversion'; did you mean '--version'?
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5793: checking whether we are using the GNU C++ compiler
configure:5812: g++ -c conftest.cpp >&5
configure:5812: $? = 0
configure:5821: result: yes
configure:5830: checking whether g++ accepts -g
configure:5850: g++ -c -g conftest.cpp >&5
configure:5850: $? = 0
configure:5891: result: yes
configure:5916: checking dependency style of g++
configure:6027: result: gcc3
configure:6125: checking how to run the C preprocessor
configure:6156: gcc -E conftest.c
configure:6156: $? = 0
configure:6170: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6170: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6195: result: gcc -E
configure:6215: gcc -E conftest.c
configure:6215: $? = 0
configure:6229: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6229: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6261: checking build system type
configure:6275: result: x86_64-pc-linux-gnu
configure:6295: checking host system type
configure:6308: result: x86_64-pc-linux-gnu
configure:6460: checking how to print strings
configure:6487: result: printf
configure:6508: checking for a sed that does not truncate output
configure:6572: result: /usr/bin/sed
configure:6590: checking for grep that handles long lines and -e
configure:6648: result: /usr/bin/grep
configure:6653: checking for egrep
configure:6715: result: /usr/bin/grep -E
configure:6720: checking for fgrep
configure:6782: result: /usr/bin/grep -F
configure:6817: checking for ld used by gcc
configure:6884: result: /usr/bin/ld
configure:6891: checking if the linker (/usr/bin/ld) is GNU ld
configure:6906: result: yes
configure:6918: checking for BSD- or MS-compatible name lister (nm)
configure:6972: result: /usr/bin/nm -B
configure:7102: checking the name lister (/usr/bin/nm -B) interface
configure:7109: gcc -c -g -O2 conftest.c >&5
configure:7112: /usr/bin/nm -B "conftest.o"
configure:7115: output
0000000000000000 B some_variable
configure:7122: result: BSD nm
configure:7125: checking whether ln -s works
configure:7129: result: yes
configure:7137: checking the maximum length of command line arguments
configure:7268: result: 1572864
configure:7316: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format
2,1 Top
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result:
configure:4052: checking whether we are cross compiling
configure:4060: gcc -o conftest conftest.c >&5
configure:4064: $? = 0
configure:4071: ./conftest
configure:4075: $? = 0
configure:4090: result: no
configure:4095: checking for suffix of object files
configure:4117: gcc -c conftest.c >&5
configure:4121: $? = 0
configure:4142: result: o
configure:4146: checking whether we are using the GNU C compiler
configure:4165: gcc -c conftest.c >&5
configure:4165: $? = 0
configure:4174: result: yes
configure:4183: checking whether gcc accepts -g
configure:4203: gcc -c -g conftest.c >&5
configure:4203: $? = 0
configure:4244: result: yes
configure:4261: checking for gcc option to accept ISO C89
configure:4324: gcc -c -g -O2 conftest.c >&5
configure:4324: $? = 0
configure:4337: result: none needed
configure:4362: checking whether gcc understands -c and -o together
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4399: result: yes
configure:4418: checking dependency style of gcc
configure:4529: result: gcc3
configure:4553: checking dependency style of gcc
configure:4662: result: gcc3
configure:4726: checking for gcc
configure:4753: result: gcc
configure:4982: checking for C compiler version
configure:4991: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5002: $? = 0
configure:4991: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5002: $? = 0
configure:4991: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:4991: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:5006: checking whether we are using the GNU C compiler
configure:5034: result: yes
configure:5043: checking whether gcc accepts -g
configure:5104: result: yes
configure:5121: checking for gcc option to accept ISO C89
configure:5197: result: none needed
configure:5222: checking whether gcc understands -c and -o together
configure:5259: result: yes
configure:5278: checking dependency style of gcc
configure:5389: result: gcc3
configure:5405: checking for gcc option to accept ISO C99
configure:5554: gcc -c -g -O2 conftest.c >&5
configure:5554: $? = 0
configure:5567: result: none needed
configure:5583: checking for inline
configure:5599: gcc -c -g -O2 conftest.c >&5
configure:5599: $? = 0
configure:5607: result: inline
configure:5625: checking whether make sets $(MAKE)
configure:5647: result: yes
configure:5715: checking for g++
configure:5731: found /usr/bin/g++
configure:5742: result: g++
configure:5769: checking for C++ compiler version
configure:5778: g++ --version >&5
g++ (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5789: $? = 0
configure:5778: g++ -v >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5789: $? = 0
configure:5778: g++ -V >&5
g++: error: unrecognized command-line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5778: g++ -qversion >&5
g++: error: unrecognized command-line option '-qversion'; did you mean '--version'?
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5793: checking whether we are using the GNU C++ compiler
configure:5812: g++ -c conftest.cpp >&5
configure:5812: $? = 0
configure:5821: result: yes
configure:5830: checking whether g++ accepts -g
configure:5850: g++ -c -g conftest.cpp >&5
configure:5850: $? = 0
configure:5891: result: yes
configure:5916: checking dependency style of g++
configure:6027: result: gcc3
configure:6125: checking how to run the C preprocessor
configure:6156: gcc -E conftest.c
configure:6156: $? = 0
configure:6170: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6170: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6195: result: gcc -E
configure:6215: gcc -E conftest.c
configure:6215: $? = 0
configure:6229: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6229: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6261: checking build system type
configure:6275: result: x86_64-pc-linux-gnu
configure:6295: checking host system type
configure:6308: result: x86_64-pc-linux-gnu
configure:6460: checking how to print strings
configure:6487: result: printf
configure:6508: checking for a sed that does not truncate output
configure:6572: result: /usr/bin/sed
configure:6590: checking for grep that handles long lines and -e
configure:6648: result: /usr/bin/grep
configure:6653: checking for egrep
configure:6715: result: /usr/bin/grep -E
configure:6720: checking for fgrep
configure:6782: result: /usr/bin/grep -F
configure:6817: checking for ld used by gcc
configure:6884: result: /usr/bin/ld
configure:6891: checking if the linker (/usr/bin/ld) is GNU ld
configure:6906: result: yes
configure:6918: checking for BSD- or MS-compatible name lister (nm)
configure:6972: result: /usr/bin/nm -B
configure:7102: checking the name lister (/usr/bin/nm -B) interface
configure:7109: gcc -c -g -O2 conftest.c >&5
configure:7112: /usr/bin/nm -B "conftest.o"
configure:7115: output
0000000000000000 B some_variable
configure:7122: result: BSD nm
configure:7125: checking whether ln -s works
configure:7129: result: yes
configure:7137: checking the maximum length of command line arguments
configure:7268: result: 1572864
configure:7316: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format
1,1 Top
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:4553: checking dependency style of gcc
configure:4662: result: gcc3
configure:4726: checking for gcc
configure:4753: result: gcc
configure:4982: checking for C compiler version
configure:4991: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5002: $? = 0
configure:4991: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5002: $? = 0
configure:4991: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:4991: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:5002: $? = 1
configure:5006: checking whether we are using the GNU C compiler
configure:5034: result: yes
configure:5043: checking whether gcc accepts -g
configure:5104: result: yes
configure:5121: checking for gcc option to accept ISO C89
configure:5197: result: none needed
configure:5222: checking whether gcc understands -c and -o together
configure:5259: result: yes
configure:5278: checking dependency style of gcc
configure:5389: result: gcc3
configure:5405: checking for gcc option to accept ISO C99
configure:5554: gcc -c -g -O2 conftest.c >&5
configure:5554: $? = 0
configure:5567: result: none needed
configure:5583: checking for inline
configure:5599: gcc -c -g -O2 conftest.c >&5
configure:5599: $? = 0
configure:5607: result: inline
configure:5625: checking whether make sets $(MAKE)
configure:5647: result: yes
configure:5715: checking for g++
configure:5731: found /usr/bin/g++
configure:5742: result: g++
configure:5769: checking for C++ compiler version
configure:5778: g++ --version >&5
g++ (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:5789: $? = 0
configure:5778: g++ -v >&5
Using built-in specs.
COLLECT_GCC=g++
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:5789: $? = 0
configure:5778: g++ -V >&5
g++: error: unrecognized command-line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5778: g++ -qversion >&5
g++: error: unrecognized command-line option '-qversion'; did you mean '--version'?
g++: fatal error: no input files
compilation terminated.
configure:5789: $? = 1
configure:5793: checking whether we are using the GNU C++ compiler
configure:5812: g++ -c conftest.cpp >&5
configure:5812: $? = 0
configure:5821: result: yes
configure:5830: checking whether g++ accepts -g
configure:5850: g++ -c -g conftest.cpp >&5
configure:5850: $? = 0
configure:5891: result: yes
configure:5916: checking dependency style of g++
configure:6027: result: gcc3
configure:6125: checking how to run the C preprocessor
configure:6156: gcc -E conftest.c
configure:6156: $? = 0
configure:6170: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6170: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6195: result: gcc -E
configure:6215: gcc -E conftest.c
configure:6215: $? = 0
configure:6229: gcc -E conftest.c
conftest.c:9:10: fatal error: ac_nonexistent.h: No such file or directory
¦9 | #include <ac_nonexistent.h>
¦ | ^~~~~~~~~~~~~~~~~~
compilation terminated.
configure:6229: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "SST Elements Library"
| #define PACKAGE_TARNAME "sst-elements-library"
| #define PACKAGE_VERSION "12.1.0"
| #define PACKAGE_STRING "SST Elements Library 12.1.0"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
| #include <ac_nonexistent.h>
configure:6261: checking build system type
configure:6275: result: x86_64-pc-linux-gnu
configure:6295: checking host system type
configure:6308: result: x86_64-pc-linux-gnu
configure:6460: checking how to print strings
configure:6487: result: printf
configure:6508: checking for a sed that does not truncate output
configure:6572: result: /usr/bin/sed
configure:6590: checking for grep that handles long lines and -e
configure:6648: result: /usr/bin/grep
configure:6653: checking for egrep
configure:6715: result: /usr/bin/grep -E
configure:6720: checking for fgrep
configure:6782: result: /usr/bin/grep -F
configure:6817: checking for ld used by gcc
configure:6884: result: /usr/bin/ld
configure:6891: checking if the linker (/usr/bin/ld) is GNU ld
configure:6906: result: yes
configure:6918: checking for BSD- or MS-compatible name lister (nm)
configure:6972: result: /usr/bin/nm -B
configure:7102: checking the name lister (/usr/bin/nm -B) interface
configure:7109: gcc -c -g -O2 conftest.c >&5
configure:7112: /usr/bin/nm -B "conftest.o"
configure:7115: output
0000000000000000 B some_variable
configure:7122: result: BSD nm
configure:7125: checking whether ln -s works
configure:7129: result: yes
configure:7137: checking the maximum length of command line arguments
configure:7268: result: 1572864
configure:7316: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format 1,1 Top
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:3997: checking for suffix of executables
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result:
configure:4052: checking whether we are cross compiling
configure:4060: gcc -o conftest conftest.c >&5
configure:4064: $? = 0
configure:4071: ./conftest
configure:4075: $? = 0
configure:4090: result: no
configure:4095: checking for suffix of object files
configure:4117: gcc -c conftest.c >&5
configure:4121: $? = 0
configure:4142: result: o
configure:4146: checking whether we are using the GNU C compiler
configure:4165: gcc -c conftest.c >&5
configure:4165: $? = 0
configure:4174: result: yes
configure:4183: checking whether gcc accepts -g
configure:4203: gcc -c -g conftest.c >&5
configure:4203: $? = 0
configure:4244: result: yes
configure:4261: checking for gcc option to accept ISO C89
configure:4324: gcc -c -g -O2 conftest.c >&5
configure:4324: $? = 0
configure:4337: result: none needed
configure:4362: checking whether gcc understands -c and -o together
configure:4384: gcc -c conftest.c -o conftest2.o
configure:4387: $? = 0
configure:4384: gcc -c conftest.c -o conftest2.o
1,1 Top
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-cugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enaion=2hecking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serializatt
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:3997: checking for suffix of executables
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result: 1,1 Top
configure:3632: found /usr/bin/gcc
configure:3643: result: gcc
configure:3872: checking for C compiler version
configure:3881: gcc --version >&5
gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0
Copyright (C) 2021 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3892: $? = 0
configure:3881: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/11/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none:amdgcn-amdhsa
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 11.3.0-1ubuntu1~22.04' --with-bugurl=file:///usr/share/doc/gcc-11/README.Bugs --enable-languages=c,ada,c++,go,brig,d,fortran,objc,obj-c++,m2 --prefix=/usr --with-gcc-major-version-only --program-suffix=-11 --program-prefix=x86_64-linux-gnu- --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --enable-bootstrap --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-plugin --enable-default-pie --with-system-zlib --enable-libphobos-checking=release --with-target-system-zlib=auto --enable-objc-gc=auto --enable-multiarch --disable-werror --enable-cet --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-offload-targets=nvptx-none=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-nvptx/usr,amdgcn-amdhsa=/build/gcc-11-xKiWfi/gcc-11-11.3.0/debian/tmp-gcn/usr --without-cuda-driver --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu --with-build-config=bootstrap-lto-lean --enable-link-serialization=2
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 11.3.0 (Ubuntu 11.3.0-1ubuntu1~22.04)
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
configure:3310: $? = 0
configure:3350: tardir=conftest.dir && eval tar --format=posix -chf - "$tardir" >conftest.tar
configure:3353: $? = 0
configure:3357: tar -xf - <conftest.tar
configure:3360: $? = 0
configure:3362: cat conftest.dir/file
GrepMe
configure:3365: $? = 0
configure:3378: result: gnutar
configure:3441: checking whether make supports nested variables
configure:3458: result: yes
configure:3509: checking whether make supports the include directive
configure:3524: make -f confmf.GNU && cat confinc.out
this is the am__doit target
configure:3527: $? = 0
configure:3546: result: yes (GNU style)
configure:3616: checking for gcc
configure:3632: found /usr/bin/gcc
1,1 Top
... rest of stderr output deleted ...
configure:3892: $? = 0
configure:3881: gcc -V >&5
gcc: error: unrecognized command-line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3881: gcc -qversion >&5
gcc: error: unrecognized command-line option '-qversion'; did you mean '--version'?
gcc: fatal error: no input files
compilation terminated.
configure:3892: $? = 1
configure:3912: checking whether the C compiler works
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
configure:3120: checking for mawk
configure:3136: found /usr/bin/mawk
configure:3147: result: mawk
configure:3158: checking whether make sets $(MAKE)
configure:3180: result: yes
configure:3209: checking whether make supports nested variables
configure:3226: result: yes
configure:3296: checking how to create a pax tar archive
configure:3307: tar --version
tar (GNU tar) 1.34
Copyright (C) 2021 Free Software Foundation, Inc.
1,1 Top
configure:3934: gcc conftest.c >&5
configure:3938: $? = 0
configure:3986: result: yes
configure:3989: checking for C compiler default output file name
configure:3991: result: a.out
configure:3997: checking for suffix of executables
configure:4004: gcc -o conftest conftest.c >&5
configure:4008: $? = 0
configure:4030: result:
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:2789: checking for a BSD-compatible install
configure:2857: result: /usr/bin/install -c
configure:2868: checking whether build environment is sane
configure:2923: result: yes
configure:3074: checking for a thread-safe mkdir -p
configure:3113: result: /usr/bin/mkdir -p
configure:3120: checking for gawk
configure:3150: result: no
1,1 Top
1,1 Top
This file contains any messages produced by compilers while It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
1,1 Top
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
1,1 Top
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
## --------- ##
## Platform. ##
## --------- ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin 1,1 Top
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
1,1 Top
This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin 1,1 Top
This file contains any messages produced by compilers while
/usr/bin/hostinfo = unknown
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin 1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-corr
e-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/..//
sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
1,1 Top
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by SST Elements Library configure 12.1.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/home/pratsriv/sst/sst-elements-src/../sst-elements-install --with-sst-core=/home/pratsriv/sst/sst-core-src/../sst-core-install
## --------- ##
## Platform. ##
## --------- ##
hostname = ccal03
uname -m = x86_64
uname -r = 5.15.0-57-generic
uname -s = Linux
uname -v = #63-Ubuntu SMP Thu Nov 24 13:43:17 UTC 2022
/usr/bin/uname -p = x86_64
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /home/pratsriv/sst/sst-elements-src/../sst-elements-install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core-src/../sst-core-install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/torch/install/bin
PATH: /home/pratsriv/.local/bin
PATH: /home/pratsriv/sst/sst-elements/install/bin
PATH: /home/pratsriv/sst/sst-core/install/bin
PATH: /home/pratsriv/softwares/upcxx/install/bin
PATH: /home/pratsriv/softwares/musl/mybuild/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /sbin
PATH: /bin
PATH: /usr/games
PATH: /usr/local/games
PATH: /snap/bin
## ----------- ##
## Core tests. ##
## ----------- ##
59,0-1 Top