volte issues srsran21.10 with open5gs

[zxmek]

trafficstars

I use the srsenb with open5gs. I can use volte normally. after about 6 minutes. I can not use volte . but I can only surf the Internet normally. here is the enb.log enb.log

[zxmek]

the max lcid is 10. here I get 11. What are the possible reasons for this result？

[andrepuschmann]

Thanks for reporting this. @zxmek Can you try with srsENB 21.04 please? @herlesupreeth have you tried VoLTE with 21.10 by any chance?

[herlesupreeth]

@andrepuschmann Unfortunately not, still using the 21.04 and it works falwlessly there

[andrepuschmann]

@zxmek Could you try 21.04 just to double check.

If you confirm there is an issue with 21.10 please send logs of the enb in info mode. Thanks

[zxmek]

Thanks for reporting this. @zxmek Can you try with srsENB 21.04 please? @herlesupreeth have you tried VoLTE with 21.10 by any chance?

thank you. now I use 21.04. there are a lot of message。As shown below.

RACH: tti=661, cc=0, preamble=1, offset=1, temp_crnti=0xd6 Disconnecting rnti=0xd6. RACH: tti=941, cc=0, preamble=38, offset=1, temp_crnti=0xd7 User 0xd7 requesting RRC Reestablishment as 0xcc. Cause: otherFailure RACH: tti=2271, cc=0, preamble=27, offset=1, temp_crnti=0xd8 Disconnecting rnti=0xd8. Disconnecting rnti=0xcc. RACH: tti=2321, cc=0, preamble=7, offset=1, temp_crnti=0xd9 Disconnecting rnti=0xd9. User 0xd7 connected

I use the B210 . should I need use the gpsdo?

[zxmek]

I have use the 21.10. I get lots of the RACH messages and RRC Reestablishment as 0xcc. Cause: otherFailure. I use volte .it seems not very stable. After a few minutes , I cannot make volte，it noly can surf the internet .the srsenb log .I have been upload in the first issue. enb.log

I think, the 21.04 is more stable.

[zxmek]

Thanks for reporting this. @zxmek Can you try with srsENB 21.04 please? @herlesupreeth have you tried VoLTE with 21.10 by any chance?

thank you . I Find the question in the old issue.