configuration when ue and gnb installed in separate machines

[faratell]

Hello. I have installed open5gs in one machine with this ip: 172.20.70.126 , srsRAN_project in another machine as zmq gnb : 172.20.70.110 and srsRAN_4G in another machine as zmq ue: 172.20.70.115 open5gs and gnb run correctly and gnb successfully connected to amf. in gnb_zmq.yaml Iset device_args: tx_port=tcp://172.20.70.110:2000,rx_port=tcp://172.20.70.110:200>

in ue_zmq.yaml I set:

device_name = zmq device_args = tx_port=tcp://172.20.70.115:2001,rx_port=tcp://172.20.70.115:2000,base_srate=23.04e6

where shoulde be set the ip address of gnb for ue and how recognized it?

Issue Description

./srsue ./ue_zmq.yaml Active RF plugins: libsrsran_rf_zmq.so Inactive RF plugins: Reading configuration file ./ue_zmq.yaml...

Built in Release mode using commit ec29b0c1f on branch master.

Opening 1 channels in RF device=zmq with args=tx_port=tcp://172.20.70.115:2001,rx_port=tcp://172.20.70.115:2000,base_srate=23.04e6 Supported RF device list: zmq file CHx base_srate=23.04e6 Current sample rate is 1.92 MHz with a base rate of 23.04 MHz (x12 decimation) CH0 rx_port=tcp://172.20.70.115:2000 CH0 tx_port=tcp://172.20.70.115:2001 Current sample rate is 23.04 MHz with a base rate of 23.04 MHz (x1 decimation) Current sample rate is 23.04 MHz with a base rate of 23.04 MHz (x1 decimation) Waiting PHY to initialize ... done! Attaching UE...

[s5uishida]

@faratell

Is the following helpful?

https://github.com/s5uishida/open5gs_5gc_srsran_sample_config

[faratell]

Thank you very much for your advice. I will check it

[ninjab3s]

TX must be the address you want to send to, RX must be the address you receive on/bind to. I hope that helps.