sq2mo

I believe this is solved - TOCALL is now APAT81 in FW 1.15.

Assuming you have Linux - check if you have "Auto Gain Control" function set to off in Alsamixer.

> * APRS-IS only: set `-1` as your passcode. APRSdroid will still send packets, but they won't be accepted by the IS server Minus sign "-" seems to be not...

I believe direct sampling can be set by editing start_rtl_command in config_webrx.py.

Try applying a low-pass filter between the rtl-sdr and your antenna - helps for FM signals appearing on HF bands. Reducing the gain could also help, but since you're using...

Similar fail on the most recent source. Kernel logs show the following: ``` [17881.981138] traps: sdrpp[9029] general protection fault ip:7f6fd06f56b3 sp:7fff8506aa00 error:0 in radio.so[7f6fd06c5000+53000] [17887.242002] traps: sdrpp[9068] general protection fault...

Same issue here. Precompiled version from medet_190825_lin64.tar.gz.

Seems to be already implemented in dev: https://github.com/wb2osz/direwolf/commit/26727bbaceed168e2b8db084bff3f9ff5d3fffb2

Issue still in place for 1.7-dev-A on Raspberry Pi. Direwolf goes brrrrr (CBEACON in my case) once NTP is synced, transmitting hundreds of frames.

@wb2osz thanks for your comment. Ran a quick test stopping the ntpd service and setting the date to 2000 or so, then launched direwolf with cbeacon configured. Reenabled ntpd and......