batpred
batpred copied to clipboard
springfall2008
Set Charge Low Power Mode
Original Bug Report no 565 Single AC3 Inverter Economy 7 setup no export. When low power mode is selected it operates correctly but is sending repeated commands to the Inverter as shown in the GivTCP Log below. There are more off the same above the time line shown below when charging started at 00:30. The inverter charge is being correctly set it just sends the commands multiple times
New report back as requested below
Hi Trefor just checked the fix as requested and unfortunately the original problem is still occurring within the GIVTCP Log as below but also there is a minor error message in the Predbat Log when the process is trying to set the charge rate and it returns a message ( WARN: Inverter 0 set charge rate 500 via REST failed got 380 ) even though the GIVTCP Log is showing a change to 500 has been applied. This happened throughout the charge period.
as below
Predbat Log
2024-02-16 00:35:03.627599 INFO pred_bat: Inverter 0 current charge rate is 380 and new target is 500 2024-02-16 00:35:47.146204 INFO pred_bat: WARN: Inverter 0 set charge rate 500 via REST failed got 380 2024-02-16 00:35:47.168867 INFO pred_bat: Configuring charge window now (now 02-16 00:35:00 target set_window_minutes 30 charge start time 02-16 00:30:00 2024-02-16 00:35:47.170257 INFO pred_bat: Inverter 0 Current Target SOC is 80 already at target 2024-02-16 00:35:47.171491 INFO pred_bat: Adjust reserve to default as SOC 73 % is above target 80 % or charging active 2024-02-16 00:35:47.172757 INFO pred_bat: Inverter 0 Current reserve is 4.0 already at target 2024-02-16 00:35:47.180112 INFO pred_bat: Will not recompute the plan, it is 5.0 minutes old and max age is 30 minutes 2024-02-16 00:35:47.180981 INFO pred_bat: Completed run status Charging with Errors reported (check log)
And as before in the GICTCP Log I get repeated commands being applied every 5 mins even though the plan repeat is 30 mins see below this is repeated all through the charge window period not sure if this is meant to happen.
GIVTCP Log same thing happening as before 2024-02-16 00:30:11,195 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:30:16,825 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:30:23,264 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:30:24,603 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:30:32,565 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:30:44,714 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:30:58,155 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:31:06,284 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:31:12,874 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:31:18,473 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:31:24,904 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:31:26,254 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:31:34,244 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:35:04,981 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:35:12,918 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:35:20,710 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:35:27,308 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:35:32,713 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:35:40,619 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:40:04,009 - write - [INFO] - Setting battery charge rate to: 500 (2) 2024-02-16 00:40:08,123 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:40:15,883 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:40:25,577 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:40:37,563 - write - [INFO] - Setting battery charge rate 2 was a success 2024-02-16 00:40:45,263 - write - [INFO] - Setting battery charge rate 2 was a success
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" <[email protected]> To "springfall2008/batpred" <[email protected]> Cc "BondBug" <[email protected]>; "Author" <[email protected]> Date 10/02/2024 19:22:14 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue https://github.com/springfall2008/batpred/issues/565)
Closed https://github.com/springfall2008/batpred/issues/565 as completed.
Great thank you will test as soon as update is available
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 16/02/2024 18:54:13 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
I've added a fix on main
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1949116443, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVIQOHT6IZTLTTCYYO3YT6TNLAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBZGEYTMNBUGM. You are receiving this because you authored the thread.Message ID: @.***>
Hi Trefor should I still be installing Main or 7.16 to test Low Power Mode fix
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 16/02/2024 18:54:13 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
I've added a fix on main
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1949116443, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVIQOHT6IZTLTTCYYO3YT6TNLAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBZGEYTMNBUGM. You are receiving this because you authored the thread.Message ID: @.***>
Hi Trefor I have installed Main 7.16.1 and I am pleased to say the
issues with using Set Charge Low Power Mode is fixed with no multiple
repeats in the Givtcp Logs and no errors messages in the Predbat
Appdaemon Logs so all good brilliant work. Does the 7.16.0 Core update
also have this fix in it as HACS is showing this as a update.
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 16/02/2024 18:54:13 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
I've added a fix on main
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1949116443, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVIQOHT6IZTLTTCYYO3YT6TNLAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBZGEYTMNBUGM. You are receiving this because you authored the thread.Message ID: @.***>
Hi Trefor just for your info I have also test 7.16.0 to test Charge Low Power Mode and that appears to be working as well so all good thanks again for all your hard work
Regards
Dave Evans
------ Original Message ------ From "Dave Evans" @.> To "springfall2008/batpred" @.> Date 17/02/2024 21:28:03 Subject Re[2]: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
Hi Trefor should I still be installing Main or 7.16 to test Low Power Mode fix
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 16/02/2024 18:54:13 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
I've added a fix on main
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1949116443, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVIQOHT6IZTLTTCYYO3YT6TNLAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBZGEYTMNBUGM. You are receiving this because you authored the thread.Message ID: @.***>
Hi Trefor everything is working as expected with no error messages in either GIVTCP Log or Predbat LOG but I just wanted to check that the GICTCP Log is reporting what you would expect as it seems to report that the Charge Rate message is being sent every 5 Minutes even though there has been no change in the charge rate see below. The calculate plan time is set to 15 mins As I said it all is working fine and as I said the Prebat Log is not showing any errors
2024-02-20 01:30:04,018 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 01:30:05,576 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:35:03,808 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 01:35:05,185 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:40:03,976 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 01:40:05,333 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:40:16,157 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 01:40:17,704 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:45:05,141 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:50:05,126 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:55:05,340 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 01:55:17,477 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:00:05,694 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:05:07,399 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:10:04,931 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:10:17,259 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:15:03,835 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 02:15:05,196 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:20:05,122 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:25:03,587 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 02:25:04,943 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:25:16,882 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:30:03,590 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 02:30:04,943 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:35:05,144 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:40:05,077 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:40:17,638 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:45:03,589 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 02:45:05,945 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:50:08,776 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:55:05,146 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 02:55:15,926 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 02:55:17,289 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:00:04,851 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 03:00:06,398 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:05:03,601 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 03:05:04,952 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:10:06,144 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:10:18,211 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:15:04,938 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:20:05,061 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:25:03,596 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 03:25:04,945 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:25:16,749 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:30:03,791 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 03:30:05,734 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:35:03,798 - write - [INFO] - Setting battery charge rate to: 1625 (8) 2024-02-20 03:35:10,033 - write - [INFO] - Setting battery charge rate 8 was a success 2024-02-20 03:40:04,915 - write - [INFO] - Setting battery charge rate 9 was a success 2024-02-20 05:20:03,754 - write - [INFO] - Setting battery charge rate to: 1875 (9) 2024-02-20 05:20:05,106 - write - [INFO] - Setting battery charge rate 9 was a success 2024-02-20 05:35:06,345 - write - [INFO] - Setting battery charge rate 9 was a success 2024-02-20 05:50:04,963 - write - [INFO] - Setting battery charge rate 10 was a success 2024-02-20 06:00:03,801 - write - [INFO] - Setting battery charge rate to: 1750 (9) 2024-02-20 06:00:05,158 - write - [INFO] - Setting battery charge rate 9 was a success 2024-02-20 06:05:03,605 - write - [INFO] - Setting battery charge rate to: 3000 (50) 2024-02-20 06:05:04,959 - write - [INFO] - Setting battery charge rate 50 was a success 2024-02-20 07:00:03,782 - write - [INFO] - Setting battery discharge rate to: 0 (0) 2024-02-20 07:00:04,123 - write - [INFO] - Setting battery discharge limit 0 was a success 2024-02-20 07:00:11,905 - write - [INFO] - Disabling Charge was a success 2024-02-20 07:00:19,694 - write - [INFO] - Setting shallow charge 100 was a success 2024-02-20 07:30:03,778 - write - [INFO] - Setting battery discharge rate to: 3000 (50) 2024-02-20 07:30:04,117 - write - [INFO] - Setting battery discharge limit 50 was a success 2024-02-20 07:30:09,511 - read - [INFO] - Saving current energy stats at start of day rate tariff (Dynamic) 2024-02-20 07:30:16,191 - write - [INFO] - Setting shallow charge 4 was a success
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 18/02/2024 10:25:46 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
Great, yes I released this fix in 7.16.0 :)
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1951096031, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVI4RARWERTF54KHMMLYUHJKVAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJRGA4TMMBTGE. You are receiving this because you authored the thread.Message ID: @.***>
Forgot to say I am on Economy 7 tariff and have set this up in the Apps.yaml file and set up as per your recommendations with switches set as per attachments.
Regards
Dave Evans
------ Original Message ------ From "Trefor Southwell" @.> To "springfall2008/batpred" @.> Cc "BondBug" @.>; "Author" @.> Date 18/02/2024 10:25:46 Subject Re: [springfall2008/batpred] Set Charge Low Power Mode (Issue #760)
Great, yes I released this fix in 7.16.0 :)
— Reply to this email directly, view it on GitHub https://github.com/springfall2008/batpred/issues/760#issuecomment-1951096031, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4MAYVI4RARWERTF54KHMMLYUHJKVAVCNFSM6AAAAABDLX2F2GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJRGA4TMMBTGE. You are receiving this because you authored the thread.Message ID: @.***>