springfall2008
Strange behavior, Trefor requested log
Describe the bug Strange discharge behaviour leaving excessive %SOC in batteries pre cheap rate charge. Last night it finished the dump 2 hrs prior to the cheap rate charge leaving 15% of dumpable power in the bats. I manually dumped it myself to maximise my profit. it also calculates a dump cycle that is way to short to get rid of the reserve battery. I had a thought this morning, maybe my heat pump is causing the issue via historical load?
Expected behaviour i would like to see a more dynamic dump plan, but id like to win the lottery as well! i have 45kw of battery that i can charge in 5 hrs it could have dumped some of the excess in the first 2 hrs dump? i need to think the through more.... The plan is dumping during the charge cycle even though no planed dumps were schedules at 00:00 when i checked the plan
Predbat version
xxxx
Environment details
sunsynk 8kw inv 45kwh seplos batts 5kwh export limit.
- Inverter and battery setup
- Standard HAOS installer or Docker
- Anything else?
Screenshots If applicable, add screenshots to help explain your problem. The most useful ones can be your battery chart, the Predbat HTML plan and your current settings in HA.
Log file Can you capture a log file from the time of the issue, debug mode is not normally required.
Predbat debug yaml file Enable debug mode and let Predbat run for one cycle. Look in the 'debug' directory under the Predbat add-on and take the .yaml file for the time period in question. Rename the predbat_debug_XX_XX_XX.yaml to predbat_debug_XX_XX_XX.yaml.txt and upload it to Github. This will allow your plan to be reproduced and also stores all your settings for review.
I'd really need the debug.yaml file as mentioned in the issue template to look at this one
