spleenware

Regarding the Timed Out issue: This usually happens if the encryption keys haven't been setup (or the other device is actually offline). At present you need to make the Home...

BTW, I am fleshing out a user guide here in the Wiki: https://github.com/spleenware/ripple/wiki/Commander-app-user-guide

Pager devices are a little different. They set their own ID, and you import them into Commander app, if you want to be able to text them. To import tap...

1. no, they don't need a smartphone. But they do need unique IDs. The smartphone/app assigns this when it connects, but you can program dedicated repeater nodes using the Ripple...

I'm not sure how to diagnose this. So, did the firmware flashing succeed? If it did, but the board just seems to not be responding, try opening the serial monitor...

I could try ordering one of the exact boards you have and try myself. Otherwise, it's probably near impossible to diagnose what could be happening. What is the buy link?

That first invocation looks like it was successful. When it says "Leaving... Hard resetting via RTS pin..." usually indicates success. Have you tried opening the serial monitor in Arduino IDE,...

thanks for the suggestion. Yes, it would make sense to display something on the OLED on bootup. BLE build is still pretty flaky. Classic seems to work OK. You just...

No, there is just a single firmware now, but you set the frequency in the Android apps. On Tue, Oct 11, 2022 at 5:58 PM 17dshaikh ***@***.***> wrote: > Does...

You need to install the Arduino IDE, and add the board support for the Feather (Cortex M0 family), then on the command line you run a command like the one...