SparkFun_DataLogger
SparkFun_DataLogger copied to clipboard
Documentation and firmware for the SparkFun DataLogger IoT line of products.
I would like to try this board to log a UART sensor. When is UART data logging support expected to be included? Thanks
Is there any future plan to implement an interrupt using the PPS from a GNSS? This would help keep the most accurate reference clock, rather than relying on NMEA strings...
magnetometer temperature enabled causes datalogger lockup - https://www.sparkfun.com/products/20594
when the magnetometer has the temperature output enabled, the datalogger locks up after ~a few hundred samples
i have been attempting to configure the IoT - 9dof to store data at various rate(s) and so far, things appear to be mostly working, but only for limited file...
can the boot (or reset) button be used to initiate closing of the current file being logged and incrementing the file number for the next reset. thanks!
I'm using version 01.01.01 - build 0000f4. I've enabled NTP with servers: pool.ntp.org and time.nist.gov, and I'm connected to wifi, but the main clock quickly falls behind. To resync the...
Hi, Would it be possible to add support for accessing saved logs from the SD card over the serial connection (so the device doesn't need to be turned off and...
I bought this board https://www.sparkfun.com/products/20594 SparkFun DataLogger IoT with a SF TMP117 temp sensor plugged in the board. I am using the adafruit IO mqtt service. After configuring the parms...
I wanted to use my BME68x to calculate a air quality index. After some research on the breakout board, I discovered there is an embedded library by Bosch that is...
I have an `AK9753` presence sensor breakout board from sparkfun (https://www.sparkfun.com/products/14349) but there is no support for that device. Is there a way I can write a "driver" for that...