SparkFun_CAN-Bus_Arduino_Library
SparkFun_CAN-Bus_Arduino_Library copied to clipboard
sparkfun
Hi, I need to have support for 29 bit identifiers in a project I'm working on. I have working code for it that I would like to contribute, but I'm...
I imagine this is highly unlikely, but any chance someone can port this to SAMD architecture? Eg, to be used with an Adafruit M0 device or similar.
I have the Sparkfun can bus shield and I'm tryng to connect to an ecu that works at 1 mbps. Unfortunately this library only supports baud rates up to 500...
Just to keep project boards clean it would be useful to have a 2 pin through-hole jumper (for flea-clip short) and a surface mount resistor in series between the CANH...
I was not able to get any GPS readings. I am using: CAN-BUS Shield (DEV-13262) and GPS Receiver EM-506 (GPS-12751) ordered bis SK Pang Arduino Uno R3 Looking at the...
The ECU Demo sketch logs all zeros for GPS data to the SD card. Tried doing a serial debug of the same data and it's zeros as well.
We are using Sparkfun CAN shield and Arduino Uno to build a CAN network. We are observing the data in CAN network using KVaser Canking. When we send a data...
I am working on a project so I bought a sparkfun redboard Plus and a sparkfun can-bus shield. I went to program it with OBD-II to DB9 Cable that I...
Is the CAN shield supposed to work with the Leonardo? It doesn't work for me, and there are various forum threads that say the SPI pins aren't in the right...
