Pads for LED-RGB-CA are over lapping

[sonic2wb]

[sonic2wb]

[PaulZC]

Hi @sonic2wb ,

I am closing this in favour of #132. Have you checked your design rules (DRU) as mentioned in #132?

Best wishes, Paul

[sonic2wb]

I tried to change them but I'm not sure how to do that. If someone could show me how to fix them. My manufacturer caught the error and I think they fixed it on their end

On Thu, Feb 29, 2024, 10:49 AM Paul Clark @.***> wrote:

Hi @sonic2wb https://github.com/sonic2wb ,

I am closing this in favour of #132 https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/132. Have you checked your design rules (DRU) as mentioned in #132 https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/132?

Best wishes, Paul

— Reply to this email directly, view it on GitHub https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/359#issuecomment-1971427590, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADJML4RCAPNJTKRZXU66ELYV5GYZAVCNFSM6AAAAABEAEWBV6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZRGQZDONJZGA . You are receiving this because you were mentioned.Message ID: @.***>

[sonic2wb]

Also this was with the default rules in fusion

On Thu, Feb 29, 2024, 10:49 AM Paul Clark @.***> wrote:

Hi @sonic2wb https://github.com/sonic2wb ,

I am closing this in favour of #132 https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/132. Have you checked your design rules (DRU) as mentioned in #132 https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/132?

Best wishes, Paul

— Reply to this email directly, view it on GitHub https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/359#issuecomment-1971427590, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADJML4RCAPNJTKRZXU66ELYV5GYZAVCNFSM6AAAAABEAEWBV6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZRGQZDONJZGA . You are receiving this because you were mentioned.Message ID: @.***>

[PaulZC]

If you load the SparkFun-2-Layer-Minimum-JLCPCB design rules, the issue goes away.

Download this file: https://github.com/sparkfun/SparkFun_Eagle_Settings/blob/main/dru/SparkFun-2-Layer-Minimum-JLCPCB.dru

Then, in the Board editor, open Edit \ Design Rules. Click Load, select the .dru file, then click Apply:

I hope this helps, Paul

[sonic2wb]

Thanks I'll try that

On Thu, Feb 29, 2024, 11:03 AM Paul Clark @.***> wrote:

If you load the SparkFun-2-Layer-Minimum-JLCPCB design rules, the issue goes away.

Download this file: https://github.com/sparkfun/SparkFun_Eagle_Settings/blob/main/dru/SparkFun-2-Layer-Minimum-JLCPCB.dru

Then, in the Board editor, open Edit \ Design Rules. Click Load, select the .dru file, then click Apply:

image.png (view on web) https://github.com/sparkfun/SparkFun-Eagle-Libraries/assets/5690545/2ef2af26-2e03-420e-aeec-f05ecf739fc1

I hope this helps, Paul

— Reply to this email directly, view it on GitHub https://github.com/sparkfun/SparkFun-Eagle-Libraries/issues/359#issuecomment-1971457046, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADJML5SJTG7B5ZZWQE4LR3YV5IOPAVCNFSM6AAAAABEAEWBV6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZRGQ2TOMBUGY . You are receiving this because you were mentioned.Message ID: @.***>