Blackberry_Trackballer_Breakout
Blackberry_Trackballer_Breakout copied to clipboard
sparkfun
The SparkFun BlackBerry Trackballer Breakout gives you easy access to a trackball which measures up, down, left, and right movements, clicks on the board, as well as adding a bit of flair to your proj...
NOTE: This product has been retired from our catalog. If you are looking for more up-to-date info, please check out some of these resources to see how other users are still hacking and improving on this product.
SparkFun BlackBerry Trackballer Breakout
SparkFun BlackBerry Trackballer Breakout (COM-13169)
The SparkFun BlackBerry Trackballer Breakout gives you easy access to a trackball which measures up, down, left, and right movements, clicks on the board, as well as adding a bit of flair to your project with four built-in LEDs. The trackballer breakout can be hooked into an Arduino compatible device to provide you with an intuitive direction controller.
Repository Contents
- /Firmware - Example Arduino code
- /Hardware - Eagle design files (.brd, .sch) for the main PCB, and the mounting PCB.
- /Production - Production panel files (.brd) for the main PCB. The mounting PCB did not need to be panelized.
Documentation
- Hookup Guide - Basic hookup guide for the Trackballer Breakout.
- SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
- SparkFun 3D Model repo - 3D models of SparkFun products.
Product Versions
License Information
This product is open source!
The hardware is released under Creative Commons ShareAlike 4.0 International.
The code is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!
Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.
sparkfun