spamwax

not familiar how to do `keepsyms`! do I need to build zfs from source or this is something related to macOS? If there is a guide on how to do...

ok, I'll try this and report. I am using Clover for multibooting, so I am guessing I can add the boot arguments in Clover's starting screen. side question: Since I...

@lundman Ok, I finally managed to get the symbols in crash reports: [reboot 1](https://gist.github.com/spamwax/89b60cb445e5a22b73e5794b92209290) & [reboot 2](https://gist.github.com/spamwax/64afea59742026185c0c2364455d7915) Again, these happened after system successfully boots and I can log-in, but after...

hmmm... given the timeline of that issue I am guessing a fix is not available yet :) If there is anything I can do to help with replication/logs please let...

ok, let me try these. The reason I thought fresh install will help is because everything was just working and I hadn't run a scrub or anything like that on...

I disabled the launchctl script and tried all of the suggested troubleshooting steps. both `import -N` & `import -o readonly=on` caused a panic after about 30 seconds while the command...

going down to -10 didn't work. I can attached my pool to a Linux machine, is there anything I should know in order to try & fix the pool in...

@lundman So I could successfully mount the pool on Linux in readonly mode. However when I do `zdb -l /dev/sdb`, I get `failed to unpack label 0` through `label 3`...

ok, so I just did the export/import in a non-readonly in Linux. `zdb -c` didn't return any glaring issue. However `txg` number I am getting in Linux are different than...

ok, thanks for all your help. I'll try the mac & report back. Just curious why macOS was unable to import the pool! Is it OS related or zfs difference...