SP9BSL / Slawek

Hi all, I have the same issue with firmware/software v1.3.0. Everything freezes sometimes after few minutes and sometimes after an hour. Sometimes entering new value for freq span or center...

Hello OneOfEleven, just wonder watching your video if the RaspberryPi 4 can handle this throughput or is it reserved for big machine? Did you or anyone tested for this option?...

Danilo, agree. Function names are borrowed from first/old approach of Chris and it looks a bit strange when function name begins with old display name (HY28_...) and we use it...

Hi, a year ago I tried to use old Atom based Netbook with screen resolution of 1024x600. For the decode/transmit it worked fine, but the display resolution was too low...

Hi, no. There is no progress in this topic. We've described the reasons above. I remember that Chris (M0NKA) worked on this some time ago but this is not UHSDR......

Hi, this is very complicated matter, not reachable on F4 core when it does so many things in parallel, you may read some in the AD1893 datasheet. I've tried this...

First of all, mcHF is not intended to be used on 6m unless you change the LPF/BPF filters, please look for the filter characteristics for mcHF on the web. I'm...

@roger: db4ple mentioned about RX option in debug menu, the tx is limited by pa_info_t (at least it should be) - I agree to limit the RX by default. BTW...

Hi Roger, I'll break my rule: do not support the clones, look to the mysterious code here: https://github.com/df8oe/UHSDR/blob/4488defed8e78784a0e74f4e42e969c8a5c61275/mchf-eclipse/drivers/ui/ui_driver.c#L5141 If you are able to compile the code, probably you can debug...

So, you are the one who can bring some light on this case, noone of the developers have a clone... Regarding the build machine, I use W7, W8.1 and OpenOCD...