soportemodemat

Please help me with this topic, Do you have any ideas?

Hello @besawn thank you for your reply. Yes we are working together in this case. This server is HP ProLiant BL460c G7 The output is this one for all the...

@cxhong when I execute that command that you told me I got this error for both nodes: Error: Invalid or unsupported command 

> This command can also be used to check firmware levels: `rinv firm` Hello @gurevichmark with that command I get this result, how can it help me to solve this...

> Turn off debug trace mode, so it is easier to read the output with `chdef -t site clustersite xcatdebugmode=0` > Then run the `rinv firm` command against working and...

> Difference in firmware level could explain why one node is booting and the other one does not. > You can try to upgrade the firmware on `quinde-1-2` to the...

> @soportemodemat Are the two nodes not the same models ? The `quinde-2-8` seems to have different firmware level. > > Have you tried installing diskful or diskless vanilla Centos8...

I have still the same problem, it just happens with xcat on that server but when I install via cdroom there is no anyproblem during installation:  ANy ideas to...

> @soportemodemat I would recommend installing diskful vanilla Centos8 on `quinde-1-2` with xCAT. That could tell you if there is something wrong with the server or with your custom Centos8...

HI @gurevichmark I really appreciate your reply. About the link, the error that I have is related to iscsi dracut init fails and that entry is here:  Now, I...