sohamakl

Sorry, I should have gone into more detail. I am using the latest stable release and the LDAP Auth plugin with SSO. In this case, shouldn't the option to start...

Thanks for your support, through your tips I looked for more debug functions and noticed that the AuthLDAP plugin has its own debug function. The problem was that my test...

If I do `blink1-tool --rgb 255,0,255` I got the response `set dev:0:0 to rgb:0xff,0x00,0xff over 300 msec` blink(1) switchs on the defined color and some seconds later off again.

Version is `id:0 - firmware:303 serialnum:38b9be26`. I wouldn't know that other processes are accessing my blink(1).

- No Blink1Control2 in systray or task manager found - I'm using Windows 10 home latest public version - Direct connected to my laptops - When windows is running it's...

I have tested now on an other machine. Also windows 10. No other blink(1) software than blink1-tools.exe installed or downloaded on this machine but same behavior.

Hi, the firmware update has not changed anything. The delay with which blink(1) is switched off again is almost exactly 3 seconds. In the meantime I have tested on a...

USB Selective Suspend was truly enabled but changing to disable did not solve my issue.

When the monitor is just switch to black screen in night mode it would be great to toggle between night and photo mode. I would prefer to configure the navigation...

I'd like to send you a Raspberry Pi 3 to support the project. How can we exchange addresses?