Current Power drops to 0 every hour

[purcell-lab]

https://github.com/sockless-coding/panasonic_cc/blob/5746f9ccf8d33bcbc0f1d5bc4fab6c4a5d74bad8/custom_components/panasonic_cc/panasonic.py#L132

I was wondering if we could revisit the included calculation for 'current power', as my power seems to update each hour at minute 33 to the correct value for the hour and then resets to zero at 5 minutes past the hour, so half of each hour is zero:

I think it would be better to see something like this as the standard output:

Based on the output from pcomfortcloud, fixed value for each hour:

`$ pcomfortcloud $user $passwd history 1 Day 20210728 id : xxxxxxxxxxxx parameters currencyUnit : $ energyConsumption : 12.600000000000001 estimatedCost : 0.0 historyDataList : dataNumber : 0 consumption : 0.1 cost : 0.0 averageSettingTemp: 17.0 averageInsideTemp: 16.5 averageOutsideTemp: 6.25

    dataNumber       : 1
    consumption      : 1.1
    cost             : 0.0
    averageSettingTemp: 17.0
    averageInsideTemp: 17.0
    averageOutsideTemp: 6.5

    dataNumber       : 2
    consumption      : 1.0
    cost             : 0.0
    averageSettingTemp: 17.0
    averageInsideTemp: 17.0
    averageOutsideTemp: 7.75

    dataNumber       : 3
    consumption      : 0.9
    cost             : 0.0
    averageSettingTemp: 17.0
    averageInsideTemp: 17.0
    averageOutsideTemp: 7.5

    dataNumber       : 4
    consumption      : 0.9
    cost             : 0.0
    averageSettingTemp: 17.0
    averageInsideTemp: 17.0
    averageOutsideTemp: 9.75

    dataNumber       : 5
    consumption      : 0.9
    cost             : 0.0
    averageSettingTemp: 17.0
    averageInsideTemp: 16.75
    averageOutsideTemp: 10.25

    dataNumber       : 6
    consumption      : 0.9
    cost             : 0.0
    averageSettingTemp: 18.5
    averageInsideTemp: 18.25
    averageOutsideTemp: 10.0

    dataNumber       : 7
    consumption      : 2.4
    cost             : 0.0
    averageSettingTemp: 18.5
    averageInsideTemp: 17.75
    averageOutsideTemp: 10.0

    dataNumber       : 8
    consumption      : 1.1
    cost             : 0.0
    averageSettingTemp: 19.25
    averageInsideTemp: 18.75
    averageOutsideTemp: 10.75

    dataNumber       : 9
    consumption      : 3.3
    cost             : 0.0
    averageSettingTemp: 19.5
    averageInsideTemp: 18.75
    averageOutsideTemp: 10.0

    dataNumber       : 10
    consumption      : 0.0
    cost             : 0.0
    averageSettingTemp: 19.5
    averageInsideTemp: 19.0
    averageOutsideTemp: 9.0

    dataNumber       : 11
    consumption      : -255
    cost             : -255
    averageSettingTemp: -255
    averageInsideTemp: -255
    averageOutsideTemp: -255

    dataNumber       : 12
    consumption      : -255
    cost             : -255
    averageSettingTemp: -255
    averageInsideTemp: -255
    averageOutsideTemp: -255`

[sockless-coding]

Hmm, guessing Panasonic has different update intervals for their devices when it comes to energy readings mine updates every 15min

But some time you get 0 values followed by a large spike when it "catches up"