Steven Hirsch

All my testing was with a much older Raspberry Pi model, but that should be fine if running Raspbian "Jessie" operating system. I think the newer ones may come with...

I guess I"m not sure what you are trying to accomplish. My controller code was written for a Katana, not a GT-10. Can you elaborate a bit on your setup?

Yes, if the GT-10 insists on sprinkling other messages around the CCs you won't be able to trigger a save. The state machine code expects (3) CC#3 = 127 in...

So, to be sure I understand, xx yy 12 15 is for the boost/mod knob and xx yy 12 16 is for delay/fx knob?

Hi, wallo At the present time, only CC#70 is mapped to sysex (master volume). I intend to greatly expand the available mappings, but haven't had time yet to do so....

Volume control works just fine - I use it regularly. Are you able to get basic function like program-change to work? If so, please double check the MIDI channel for...

I see. I have not implemented any bindings for CC#7. If PC and EFX toggle is operational I can only guess you have something misconfigured in the FCB1010. On 3/9/17...

Hi. If you don't mind I'd like to reopen this issue until we get you sorted out. There are a couple of other folks using the bridge successfully (volume and...

I'm sorry to hear of these issues. First, I've never tried to use keyboard or mouse with a RaspberryPi (ssh login only) and can certainly accept that the USB parameter...

Where did the value "000e" come from? Are you sure that's correct? You may need to do some snooping with PCAP and Wireshark to see how the FUSE software discovers...