CrownCooler

CrownCooler copied to clipboard

Dragon HF not fitting

4

Hi, try to fit a dragon HF hotend, but is not is not possible. Do you have some extra component for dragon hf?    

Burtila

Additional Duct Options for V2 CrownCooler

1

Do you have any intentions of releasing different ducts for the V2 CrownCooler? I'd love to see a Rapido HF (not the UHF) options for the V2. Thanks in advance!

Ekodas

WS7040 Wiring and configuration

2

I am attempting to set up a ws7040 on my voron trident using a v1.1 octopus board and have found that the fan is turning on at max speed as...

Maceon12

V2 When?

7

I was wondering when the v2 will come out, because I realy like the design but v2 looks like its more compact.

BlackShadeOSS

I'm using 4056 fan on my printers and it gives quite good result. I think the output power will be in the middle between 4028 and CPAP. In my setup,...

ChipCE

The readme BOM still specifies parts for the V1. Looking at the STLs for V2 the fans seem to be 40x40 for the toolhead and 30x30 for the extruder. Any...

kayboy-bebop

SSBun

Endoscope nozzle cam mount?

1

thus far it seems there isn't any way for a nozzle cam on this toolhead. I only suggested an endoscope because they're cheap for 720p ones, especially off of Temu,...

Nathan22211

Current Rapido duct interferes with TAP

4

at least it interferes with the vatali tap, but it seems any tap it interferes with

Nathan22211