CCFIVE

split hex file in v1/v2 doesn't work

1

 Since you last performed the hex separation, the hex files have stopped functioning properly.

I hope microcode can add a 'Minus Block'

1

when I play a [turn dial](https://microsoft.github.io/microcode/docs/samples/count-turns) It is very necessary to add the minus block 

Sometimes the microcode execution gets stuck in Microbit

3

This situation usually occurs when I write programs that are quite large and have many Jacdac modules connected. when I press reset, it should operate normally again. Error Code is...

v2.5.47 The microphone's value cannot reach level 5 This is the microcode program:  I tried to test it with a program from the makecode platform and got a maximum...

Hello everyone, Our product has been updated from an exposed circuit board to a plastic casing, enhancing the protection of the screen and battery, and improving the feel. The product...

Microbit V2 causes the screen to flip up and down when inserted into a NewbitArcadeShield.

1

We found that when the MicrobitV2 was inserted diagonally into the NewbitArcadeshield the screen flipped up and down. But it doesn't happen with Arcade (microbitV2). https://github.com/user-attachments/assets/b2a5dea6-8a02-4f73-b106-7f3746a639c0 We guess it's caused...

Unplugging microbitv2 causes screen to be upside down

1

Plugging in the MicrobitV2 when the NewbitArcadeShield is powered on may cause the screen to go upside down. I recorded a video here to illustrate this: 1, V2 (makecode) inserted...