smartHomeHub
Atomberg Renesa speed 1 issue
The atomberg renesa remote can only set fan speed from 2 to 6 and leaves out speed 1 0- turns off the fan, 20- sets fan speed to 2, 40- sets fan speed to 3, 60- sets fan speed to 4, 80- sets fan speed to 5, and 100- sets fan speed to 6/boost. I know it's a small issue but an issue nonetheless. Otherwise I am loving it.
I submitted the PR for this. This is documented in the FAN.md file. The fan speed mapping was done intentionally to keep it to 5 notches.
You are free to modify the contents of the file to create increments of 16.7% instead of the current 20%.
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
![stale[bot] avatar](https://avatars.githubusercontent.com/in/1724?v=4 "Published by a pub.dev verified publisher"){kind=small}
I submitted the PR for this. This is documented in the FAN.md file. The fan speed mapping was done intentionally to keep it to 5 notches.
You are free to modify the contents of the file to create increments of
16.7%instead of the current20%.
How do I do that? Also instead of fan speed 2, 3, 4, 5, 6 can I map it to fan speed 1, 2, 3, 4, 5 because I don't use fan speed 6 that much?