smartHomeHub
add UFO-R11 controller support
Hi @yoavipm could you update your branch to include the fixes from the main branch? Thanks :)
Will this also work with the Zigbee ZS06? I have both a UFO-R11 & ZS06. They're functionally identical. The only difference is the ZS06 runs off usb cable power instead of batteries.
I'm probably going to add 5 or 6 different brands of aircons using these Zigbee blasters so I'm stocked to see this might be getting merged soon.
Additionally I recently found a fork that adds support of using these with ZHA. I've tested it and it works great. https://github.com/davidrpfarinha/SmartIR/commit/c839bde53d120d8afe149d6c064291cd2f380599
Since I don't have the ability to test this particular controller, if you find it works stable it could merge.
I've setup yoavipm's fork for a friend with this controller and it worked perfectly. As he said it is exactly like an mqtt controller, but an additional prefix is needed for the payload: ir_code_to_send:
Why do we need to define a new controller then? Something like a mqtt prefix that can be passed to the configuration should do the job.
I guess it's for convenience - it was just easy set this controller in the json and copy-paste the codes direct from zigbee2mqtt. But @yoavipm might be able to give more context.
It was defined that way so that you could set it up in the json easily. it is a different device/controller after all, even though it uses the mqtt under the hood. Adding prefix to configuration is too specific in my opinion. I'll rebase with main soon.
Why do we need to define a new controller then? Something like a mqtt prefix that can be passed to the configuration should do the job.
Chiming in since I am using both ZS06 and UFO-R11 daily. In my experience, it's not just a prefix. There is also the need to close out the quotations. The combination of the prefix and having to close out the quotes makes it more prone to formatting errors and generally more challenging to setup the json code file.
I setup my own template which allows me to double-check the formatting much easier without the codes. I replace the @@@ with the recorded IR codes accordingly.
https://pastes.io/szxvgv7zev
I have no expertise to say what can/should change, just wanted to share my experience, it is quite the learning curve to make sure it's the code and/or the formatting that may be holding back someone's json code.
I don't get this discussion regarding a new controller.. this is indeed a new MOES Zigbee controller . it works well, and all you have to do is change the name of your controller, why should we make this more complicated with prefix stuff in configuration file.. anyways, I'm using it for a good few months and it works flawlessly . I also implemented a new feature for dedicated ON/OFF code combinations regarding ELECTRA ACs, where changing the mode doesn't turn on the AC, but that's a discussion for a different topic.
Hi @yoavipm could you update your branch to include the fixes from the main branch? Thanks :)
Done
I don't get this discussion regarding a new controller.. this is indeed a new MOES Zigbee controller . it works well, and all you have to do is change the name of your controller, why should we make this more complicated with prefix stuff in configuration file.. anyways, I'm using it for a good few months and it works flawlessly
I'd like to test this out, and have installed your fork, but can't figure out what to set the controller_data as in configuration.yaml Would you mind please sharing what you use?
UFO-R11 uses a completely different IR command format. Thankfully broadlink can be converted to a supported format. Check out this gist, it takes broadlink compatible definition file and spits out Tuya's version.
At least on the zigbee2mqtt I can specify controller_data: "zigbee2mqtt/IR Bedroom/set/ir_code_to_send" to put command in the correct property field.
Check out this gist, it takes broadlink compatible definition file and spits out Tuya's version.
Could you link to the gist? I'd be interested in doing some conversions.
Nevermind, found it https://gist.github.com/svyatogor/7839d00303998a9fa37eb48494dd680f
Sorry, can anyone explainme how do I import that gist? i have 3 RM4 pro but I'm switching for the tuya one :/
Sorry, can anyone explainme how do I import that gist? i have 3 RM4 pro but I'm switching for the tuya one :/
First make sure python is installed. Then download broadlink_to_tuya.py. Then in a terminal run python broadlink_to_tuya.py 1000.json
1000.json being an example of the SmartIR code that is configured for a Broadlink device.
Hi there, any chance to have this included into main branch and/or have a new release?
I just got working SmartIR with Homeassistant and UFO-R11 but using several workarounds. Thanks to anyone involded here!
Hi there, any chance to have this included into main branch and/or have a new release?
I just got working SmartIR with Homeassistant and UFO-R11 but using several workarounds. Thanks to anyone involded here!
https://github.com/litinoveweedle/SmartIR
