dps_charger

dps_charger copied to clipboard

Update README.md

1

437572-B21 would be the Part # of the originally-installed part from the factory. Spare Part # would be the item number you'd look up if you needed a replacement. (Standard...

Shadyman

Hi! I really happy to find this valuable repo. I have a HSTNS-PL41-1 HP power. It has 10 pins on top and 10 pins on button. How can I analyze...

SMotlaq

Hi there, thanks for your good explanation. I am planning to build an adjustable battery charger. Try to conttroll output voltage and respectively current by using your method. However I...

wegrei

Hi Simon, In one of your comments on some other sites, you mentioned that: "I am hacking/documenting this PSU at https://github.com/slundell/dps_charger . I aim to rebuild it to a fully...

vochong

SDA is 31. SCL is 32. The README pin out has reversed the SDA and SCL. That is confirm by the pinout.png file: https://github.com/slundell/dps_charger/blob/master/doc/random%20finds/pinout.png

sparsecli

Hi, very good project, will adapt the I2C implementation for my charger soon. Actually I am facing that PS Alarm (Pin 38) as low on every PSU and according specification...

NilsRo

Hello, I have been following your description and I am interested in lowering the voltage of the PSU to 10,3V so I can set 3xPSUs in series giving 31V. I...

CertainBot