Slic3r
Slic3r copied to clipboard
plastic volume(mm3/s) calculation filling(infil)/perimeter
when setting the desired layer height - the calculation of the volume of plastic is in%. When changing mm. The calculation changes little. The main thing is that it is very different for perimeter and infill. (outer perimeter 0.76mm3/s infill 4.66mm3/s) I'm sorry but I didn't find a way to fix this. With an increase in extrusion, the filling bulges. perimeter - thin - translucent. Is it possible to set the filament feed along with the print width? perimeter outer perimeter filling .... other
OS: Win 7 Version 1.3.1 -dev Tronxy 5SA 400 nozzle 1,0mm
; generated by Slic3r 1.3.1-dev (Build 18ddd3a36dc69d81fb9b7440498bff9e1dde8b7e) on 2022-05-09 at 22:26:08 ; external perimeters extrusion width = 0.22mm (0.76mm^3/s) ; perimeters extrusion width = 0.30mm (2.22mm^3/s) ; infill extrusion width = 0.40mm (6.21mm^3/s) ; solid infill extrusion width = 0.40mm (4.66mm^3/s) ; top infill extrusion width = 0.40mm (2.95mm^3/s)
; generated by Slic3r 1.3.1-dev (Build 18ddd3a36dc69d81fb9b7440498bff9e1dde8b7e) on 2022-05-09 at 22:06:03
; external perimeters extrusion width = 0.22mm (0.71mm^3/s)
; perimeters extrusion width = 0.30mm (2.06mm^3/s)
; infill extrusion width = 0.40mm (5.71mm^3/s)
; solid infill extrusion width = 0.40mm (4.28mm^3/s)
; top infill extrusion width = 0.40mm (2.71mm^3/s)
the finished model looks like a screenshot. the walls are transparent. no sintering. horizontal surfaces are ideal. there are no passes.