JQ6500_Serial
JQ6500_Serial copied to clipboard
sleemanj
Looping the single audio
Hello, I am very new to this, and I have a very basic question.
Is there any way to play a single audio in loop in JQ6500 audio module without Ardrino. If yes let me know the way.
If no, please let know If I apply single audio looping with Ardrino and upload the the code, can the JQ6500 work wine with looping stand alone or without Ardrino?
Don't have one here right now, but have you tried Just connecting the K1 pin to the ground of the power source? Should trigger the first file, as described in the "Simple Control with Manual Buttons To Ground" section of https://sparks.gogo.co.nz/jq6500/index.html Would be interesting to see if that just triggers it once, or continues to loop as long as the connection remains.
See playback modes for manual keyinghttps://sparks.gogo.co.nz/jq6500/index.html#manMessage ID: @.***>
I have already tried that, Either you just connect K1 with ground for once or let the connection remain for a long time, It only play the audio ones.
As detailed at the link, set to whole file multi play with appropriate resistor. ---- On Wed, 22 Feb 2023 19:14:50 +1300 @.*** wrote ---- I have already tried that, Either you just connect K1 with ground for once or let the connection remain for a long time, It only play the audio ones.
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>