sle118
Basic Authentication for the web server
Adds HTTP Basic Authentication to the web server in squeezelite-esp32.
By default, disabled.
Set a value in NVS under the http_password key and this will then be needed to access the HTTP server.
Responds to #239.
I know it's been a little while. Thank you for your patience.
I'm gonna look at the bluetooth PIN situation next. I really need it for my set up...
Still haven't had a chance to do a proper review with competing life priorities. Pin code is problematic because it will likely break most people's configuration. Instead of a pin code, it would be best to instead do something similar to what homeassistant does for pairing ZigBee or zwave devices, which is a "pair" button in the UI (or a hardware button key, like gpio0 that could be bound to that function via the existing JSON configuration for buttons and rotary). Pairing mode would activate for a limited time and associated devices hardware address stored in nvm. This is also how some devices like headsets, Bluetooth speakers, etc. Work
@sle118 I'm guessing this project has become EOL?
It has not, except that I would much prefer to concentrate our efforts in the new branch, now that I have managed to push it. Both Philippe and myself have had to take some distance from the project in the past year or so, but I am certainly willing to dive back into it if there is help from people like you.
https://github.com/sle118/squeezelite-esp32/discussions/342