cc2652-stick
cc2652-stick copied to clipboard
slaesh
CC2652RB multiprotocol 2.4 GHz development stick
All, Just overnight my zigbee2mqtt crashed. Trying to restart it results in the CC2652RB stick not being accessible. I can flash it with firmware (currently CC2652RB_coordinator_20230507.hex) and it shows up...
Will you consider making CC2674/CC2674P/CC2674R and/or CC1354/CC1354P Zigbee adapters for developers and early adopters? Check out this developer discussion in Koenkk's Z-Stack firmware repository -> https://github.com/Koenkk/Z-Stack-firmware/discussions/476 There is no community...
@slaesh Can you please consider providing new OpenThread Border Router (OTBR) "RCP mode" firmware images as well as "NCP mode" firmware images (with support for the OpenThread `spinel+hdlc+uart` protocol) and...
Hi, A lot of info about sniffing using old stick. Too few info using new cc2652 stick. Here is what I did, * Download Uniflash and [packet sniffer 2](https://www.ti.com/tool/PACKET-SNIFFER) *...
Using cc2652RB stick and trying to reprogram the IEEE address to use it in my existing infrastructure. The image i have used to test flashing is znp_CC2652RB_20200715.bin This image turns...
@slaesh Do you have any plans to make and sell a CC2652P version of your Texas Instruments CC2652 USB dongle adapter? * CC2652P = CC2652R with a built-in RF PA...
@slaesh Can I suggest that you try to reach out to @zoic21 (Loïc Gevrey) about possible collaborating and teaming up to test your cc2652 stick together with the ZGP (Zigbee...
@slaesh Can I suggest that you try to reach out to @pipiche38 (Patrick Pichon) about possible collaborating and teaming up to test your CC2652RB development stick together with the new...
@slaesh I believe that you already donated adapters to the Zigbee2mqtt project so wondering if you would also be willing to donate some of your CC2652RB stick adapters to @sanyatuning...