Fabien Batteix

Thanks for the workaround, it's working perfectly. Just out of curiosity, I've read the AFC chapter of the data sheet (and errata), but I don't see anything which can explain...

Something fishy with the 1.2.5 release (or my R16 motherboard is going crazy). Only 18 hours of printing after the upgrade and I already see three majors misbehavior... Here what...

Cold restart. New print. Got another glitch. The print just before (a 20mm calibration cube) was good. It's driving me crazy. The file: [Slave_Body_REV3.txt](https://github.com/BCN3D/BCN3DSigma-Firmware/files/1345174/Slave_Body_REV3.txt) The first layer:  (I've got...

I'm going down the rabbit hole, but I don't see any logic in this misbehavior. I'm starting to think something is wrong with the new stepper drivers upgrade and/or my...

I've downgraded to 1.2.4 (previously working fine with the old steppers drivers) and redo the whole "setup wizard" calibration to get a clean start. Using the same file as previously,...

1. No worry, I will mail the support. 2. Github was not accepting the .gcode files, that's why I renamed them .txt. Here a zip with all previously failed files,...

@svengl For me, the "bug" was resolved by replacing the SD card reader of the printer (big thank to the support team by the way). I also changed my SD...

Yes, axis moves and filament retract. One time, it even get really close to a complete disaster (Z going up on the head with partially printed stuff on bed). Disclaimer:...

Hello, I'm currently having the same error (Descriptor None was not found). I've solved the issue by monkey patching the CLIENT_CHARACTERISTIC_CONFIGURATION_UUID constant at startup in my app using : ```...

Hello, Try replacing the Serial.println with a led blink or something simple to see if the isr is called. Or set a boolean flag in the isr, and print from...