micro_8088 issues

Mouser project includes 2 ea. of the polyfuse

The Mouser project includes 2 ea. of the polyfuse, while only one is used on the board. Bill

Missing a reset pull-up resistor

2

FE2010A datasheet says that the reset line should be equipped with a 10k pull-up resistor, that is missing on the current design. Adding that 10k pull-up increased stability of the...

andykarpov

Tie pins 1 and 30 of U4 to ground in next revision?

4

So I received a pre-built Micro 8088 except they put in an SST39SF040. Practically that's not really an issue because it appears they flashed 4 images onto it at 128K...

KyleJ61782

enhancement

3D print full desktop cabinet for 8088 oh thingiverse

3

Hello, I released a project for a full desktop cabinet (CPU, PSU, Floppy disk drive) for the micro_8088 computer. I made it suitable for the Creality Ender 3 Pro, so...

giobbino

clock speed setup by keyboard doesn't work

6

Hi, not a big issue, but... the Ctrl-Alt-Keypad -/+/* sequence doesn't work (at least for me). I checked the speed with the speed.com program and there is no difference at...

giobbino

3D printed bracket for micro_8088

1

Hi, I made a 3D printable bracket for the micro_8088. There are two versions, one that requires screws and another with two pins that fit into the holes (and then...

giobbino

Is there any chance for similar mobos supporting 286/386 CPUs?

2

Just re-posting my question from NuXT issue tracker: https://github.com/monotech/NuXT/issues/13 I would love to see a similar motherboard supporting 286/386 CPUs. Is there any chance for that?

pshirshov