floppy_bios
floppy_bios copied to clipboard
skiselev
Multi-Floppy BIOS Extension
Would it be possible to have an option at boot to disable the Multi-floppy? For example: * Press F3 to bypass/do not initialize Multi-floppy FDC ... (below the option F2...
### Booting MS-DOS using Multi-Floppy BIOS Extension is slow. Times measured on an 286/AT with AMI BIOS, booting MS-DOS 6.22 from a 3.5"/1.44MB diskette With Multi-Floppy BIOS Extension : *...
In playing with the version 2.6 firmware, I noticed that the computer kept freezing on boot, when showing the floppy firmware status information. I backed down to version 2.2 and...
Tested motherboards: Asus P2B-S QDI P6I440BX/B1S Expected Behaviour: After executing the OpROM, the system should boot from an inserted MS-DOS 6.22 boot diskette. Result: The system boots and loads the...
### Disk change detection doesn't seem to work with 3.5"/1.44MB drives * Unsure if the latest Multi-Floppy BIOS Extension version is used. Test with the latest image
Been trying out a monster FDC card on a few test machines with no issues, but after trying today on the target machine where I actually want it installed, I...
Hi! Hope you are well. I've got 4 floppy setup with 2.88 3,5", 1.2 5,25" and two 1.44s 3,5". 1st FDC integrated with MB, 2nd - ISA multi I/O card....
Current release is causing a crash when used with TURBO-XT BIOS. The v2.2 included in T-XT package works fine.
I'm unable to store settings in the built-in F2 setup when using it on Micro 8088 as an extension to TURBO-XT or GLaBIOS. Possibly because I have 39SF020, not 39SF010.