Skip Hansen

@ramapcsx2 Hi Robert, my application is the same as the original poster and I had the same results more or less. Here's a scope capture of the video timing. ...

The scope shot is in circuit, the levels are about 2x without termination so the source impedance looks to be spot on at 75 ohms. At the moment my gbs8200...

I can confirm programming issues with **SOME** programmers. I have two CC-Debugger clones that I use on other projects. One is a pretty close copy of the original TI programmer...

Hi @asyarifstudio and @jack4041313 I have a different board and a different problem (#1), but perhaps we can help each other. I'm VERY interested in getting this core running. Stupid...

@rooi-oog Well you've made better progress that I have. There aren't any competing cores that I am aware of, if I can find one I'll give it a try as...

FYI: I've been able to flash both a rev A(B?) and a rev C device successfully using the original Pano updater utility over Ethernet. See https://github.com/skiphansen/pano_progfpga. Flash the *multiboot* image...

I've tested xc3sprog on both revs and it works without problems with my diligent HS JTAG adapter. The problem with Impact is most like caused by pulling the "unused" outputs...

I messed the merge up and reverted your changes. That wasn't intentional, I'll fix it and resubmit.

After further review I think it's ok, the commits from 10/27 which you have already merged confused me.

Thanks Ewen. I built the Pano target on bare Litex, but it doesn't support the DDR. I'll try to merge it from litex-buildenv or another example. I've also ordered a...