Stephen Jefferson

I don't know much about adafruit.io but when I used it briefly I was on the free account which is rate limited pretty low. Is it possible you've hit the...

I have also experienced exactly this a few times on the weather on 0.0.8. I haven't had time to dig into it, so can't say more for now than this...

OK, my issue is different, although presents very similarly. I will see if I can look into it further (as you say the logs as they stand are not very...

Sorry I misread your first log post; This is the same issue. I added a log line just after pull sys_en low to sleep and it does not execute, so...

I moved to a bench supply at 3.7v into the battery connector in case batteries became an issue with all this extra logging and sending. I also had a crash...

Lasted 2 hours on the 1 minute logging setting, which is consistent with a previous couple of findings. It's a small sample set, but anecdotally it looks like the more...

As release v.0.0.9 (https://github.com/pimoroni/enviro/releases/tag/v0.0.9) claims to have reverted to a more stable firmware base, I've pulled down the full uf2 from that release and flashed it with the aggressive polling...

Using the above as a call for Mr Murphy to expediate testing was successful. Board crashed as before 20 minutes later, total run time 2h55m.

Log file attached. The board had hung with a solid white LED on. I disconnected the power to the battery connector and then reattached the USB to pull using Thonny,...

It looks very similar to the logs before. It thinks it's waking up from RTC, but it's not, like it never properly shut down. I don't fully understand the way...