Maixduino
Maixduino copied to clipboard
How to use C/C++ PlatformIO/Arduino Framework (Not MaixPy) to use wifi
Hi,
How can I use the ESP32 Wifi module from C/C++ ? It only seems to work using the MaixPy wifi example. When I run the default ESP32 firmware, and this C++ application code
` Serial.begin(115200); // initialize serial for debugging WiFi.init(); // initialize ESP32 WiFi module
if (WiFi.status() == WL_NO_SHIELD) { Serial.println("No WiFi HW - Halting FW"); while (true); }
int8_t numberNetworks = WiFi.scanNetworks(); Serial.print("Scan Wifi Found : "); Serial.println(numberNetworks);`
This just prints the following output....
Error 4 Scan Wifi Found: 0
Note that the wifi works if I use MaixPy firmware and the example code. Also I have 2 Maixduinos both of them dont work with the C++ SDK, but both work with the Python way.
Where is the ESP32 FW that will allow me to use the wifi from the Maixduino C/C++ application ?
See my comment https://github.com/sipeed/Maixduino/issues/87#issuecomment-1275044906
See my comment #87 (comment)
Hi - So which firmware do I put on the ESP32 on the Maixduino ? My ESP32 doesnt have the original firmware anymore - as I've been experimenting with lots of different ones - there are 4 prebuilt binaries in the Maixduino web portal - do I sue one of those ? ie https://dl.sipeed.com/shareURL/MAIX/factory_firmware/esp32
Has the following maixduino_esp32_firmware_v1.4.1_0x0.bin maixduino_esp32_firmware_v1.4.0.bin NINA_W122_33.bin NINA_W122_25.bin
"I have managed to communicate it with the fork of WiFiEsp (branch esp32_spi) by @scpcom and using its fork of Maixduino."
Then you mention you have used two repos to talk to the Wifi, I'm not sure how I get this working. I have some demo code (as above), but once I have the above FW on the ESP32, do I just use this repo as the platform io library (branch esp32_spi) ?
https://github.com/scpcom/WiFiEsp/tree/esp32_spi
Or this one - the fork you mentioned ?
https://github.com/scpcom/Maixduino
Yes, my fork of WifiEsp is integrated into my fork of Maixduino: https://github.com/scpcom/Maixduino/releases It may work standalone but using my board package is the easiest way. PS: If the package is installed an the board is selected in the Arduino IDE you can open the Tools menu and change the new option "WiFi Driver" to SPI